Skip to main content
  • $198.99
  • Free 30-day Returns
  • Ships from China.
    Sold by Rufei Tech
    Top Rated
    5 (1 seller ratings)

    Shipped by Rufei Tech

    Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    ACREL ACR10R-D16TE Single-Phase DIN Rail Energy Meter, 120A Split-Core CT, RS485 Modbus-RTU, LCD, Anti-Backflow for Solar PV and Storage

    • CLAMP-ON INSTALL, NO BUSBAR CUTTING: the included split-core current transformer opens and closes around the existing cable, so you can add metering to a live distribution box without unbolting the main or shutting the panel down.
    • ONE SCREEN, THE WHOLE CIRCUIT: LCD shows voltage, current, active / reactive / apparent power, frequency, power factor, and import and export energy, so a load study or a PV check needs one device, not a multimeter plus a clamp meter.
    • BUILT FOR ZERO-EXPORT (ANTI-BACKFLOW) SYSTEMS: the meter reports power magnitude and direction over RS485 with a published Modbus-RTU register map, which is what a hybrid inverter or EMS controller reads to throttle output before power flows back to the grid.
    • BI-DIRECTIONAL, 4-QUADRANT ENERGY ACCOUNTING: tracks grid import, PV export, and battery charge / discharge separately, so you can size self-consumption instead of guessing from a utility bill.
    • 0.5-CLASS ACTIVE ENERGY ACCURACY: voltage measured to 0.2 class, current, power and active energy to 0.5 class, reactive energy to 1 class, frequency resolution 0.01 Hz accurate enough for submetering and divisional billing internally.
    • WIDE CONTROL POWER: runs on AC 85-265 V or DC 100-350 V at 10 VA or less, so it can be fed from the AC mains or straight off the battery DC bus in an off-grid or hybrid cabinet.
    • DIN RAIL MODULE, SMALL FOOTPRINT: clips onto a standard 35 mm DIN rail, about 0.35 kg, and fits consumer units, PV AC combiner cabinets, EV-charger sub-panels
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    Most solar, battery and retrofit-metering jobs fail on the boring part: the cabinet is already wired, and adding a meter normally means switching off the supply, unbolting the busbar and re-torquing everything. The ACREL ACR10R-D16TE is a single-phase DIN rail energy meter that ships with a split-core current transformer sized for a 16 mm conductor, rated at 120 A. The CT simply opens and clamps around the cable in the correct current direction, and the meter starts reporting. Once installed, it measures the full electrical picture of that one circuit: voltage, current, active, reactive and apparent power, frequency, and power factor, plus active and reactive energy in both directions. Four-quadrant, bi-directional metering is what makes it useful on a PV or battery circuit, because the same terminals tell you how much you pulled from the grid, how much you pushed out, and how much moved in and through the battery. For zero-export systems, the RS485 port running Modbus-RTU is the working interface. A hybrid inverter or energy management controller polls the meter for grid-point power magnitude and direction and reduces inverter output when power starts heading upstream, which is how you satisfy a no-backfeed requirement without a separate reverse-power relay. The register map is documented, so integration is a matter of matching baud rate, address and byte order rather than reverse engineering. Accuracy is 0.5 class for active energy, 0.2 class for voltage and 1 class for reactive energy, with 0.01 Hz frequency resolution. Auxiliary power accepts AC 85-265 V or DC 100-350 V, so the meter keeps running from either side of a hybrid system. Settings are changed from the front buttons and the LCD, and the module clips to standard 35 mm DIN rail. Typical uses: single-phase PV inverter monitoring and anti-backflow control, home or commercial battery charge and discharge accounting, circuit-level submetering in retrofits where the panel cannot be opened, and demand monitoring in energy-intensive processes such as smelting, welding and semiconductor equipment. Note that this is an indicating and monitoring instrument, not a utility revenue-billing meter, and it is CE marked rather than UL or cUL listed. Please confirm grid voltage, conductor size and local installation rules before ordering, and have a qualified electrician perform the wiring.

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: 30 days
    • This item is covered by Rufei Tech Return Policy

    Manufacturer Contact Info

    LOADING...