Meet Your Seller
AJMRTC Pico 2 W Microcontroller Board with Color-Coded Pre-Soldered Header, Compatible with Raspberry Pi Pico 2 W, RP2350 Dual-Core Dual-Architecture MCU 150MHz, 520KB SRAM 4MB Flash, 2.4G WiFi4 Bluet
- - Color-coded pre-soldered pin header, visually distinguish power, ground and signal pins to avoid wiring mistakes
- - RP2350 dual-architecture core, switchable Dual Cortex-M33 or Dual Hazard3 RISC-V, max 150MHz clock speed
- - Onboard CYW43439 wireless chip, 2.4GHz WiFi 802.11n and Bluetooth 5.2 LE for wireless data transmission
- - 520KB SRAM + 4MB flash, 26 multi-function GPIOs, 12 PIO state machines for custom communication peripherals
- - USB 1.1 interface, supports UF2 drag-and-drop flashing, compatible with MicroPython and official C/C++ SDK
Any questions? Ask CelesteSM will help you find out quickly.
AJMRTC Pico 2 W board is fully compatible with Raspberry Pi Pico 2 W. It comes with color-coded pre-soldered headers, which helps makers quickly identify pin functions and reduce wiring errors during prototyping. It adopts RP2350 microcontroller with dual-core dual-architecture design running at 150MHz. It integrates 2.4G WiFi 4 and Bluetooth 5.2 LE for wireless IoT projects. It reserves 26 GPIO pins supporting ADC, PWM, UART, SPI, I2C and powerful PIO co-processor. It supports low-power sleep modes and hardware security engine including TrustZone and SHA-256 accelerator. No extra programmer is required, just drag UF2 firmware into the USB disk. Great for wireless sensor nodes, smart home gadgets, robotics, handheld controllers and embedded learning.
Specifications:
- Brand: AJMRTC
- Chip Model: RP2350
- Processor: Dual Cortex-M33 / Dual Hazard3 RISC-V, up to 150MHz
- SRAM: 520KB
- Flash: 4MB
- Wireless: 2.4GHz WiFi 802.11n, Bluetooth 5.2 LE
- Pin Header: Color-Coded Pre-Soldered Header
- Interface: USB 1.1, GPIO, UART, SPI, I2C, ADC, PWM, PIO, SWD
- Programming: UF2 Drag-and-Drop
- Supported SDK: MicroPython, Raspberry Pi C/C++ SDK
- Application: Wireless IoT, Smart Home, Robotics, Sensor Node, Embedded Maker Project
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by ConnectFlow USA Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















