- Free 30-day Returns
Meet Your Seller
NEMIX RAM 8GB (1 x 8GB) DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM Registered Server Memory Kit
- 8GB (1 x 8GB) DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM (Registered DIMM) Server Memory Upgrade
- NEMIX RAM ECC RDIMM for servers requiring DDR4 3200MHz PC4-25600. NOT FOR PC Computers
- NEMIX RAM offers Lifetime Replacement Warranty
Any questions? Ask CelesteSM will help you find out quickly.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by NEMIX RAM Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
The NEMIX RAM 8GB DDR4-3200 ECC RDIMM is a single registered server-memory module for servers that support 8GB, 1Rx8 DDR4-3200 ECC RDIMMs. It runs at 1.2V with CAS latency 22 and is intended for server upgrades, not standard PC computers.
Recommended For
- Server administrators replacing or adding a single 8GB DIMM in a DDR4 system that supports ECC RDIMMs and the module’s 1Rx8 organization and speed.
- Homelab operators maintaining a compatible DDR4 server who want to replace a failed module or add memory incrementally for a modestly provisioned home server.
- IT refurbishers servicing older servers or workstations that specify DDR4 ECC registered memory and need a single 8GB replacement module.
- Owners of a compatible server platform who need ECC registered memory for routine server workloads and have verified the system supports this module’s capacity, rank, and speed.
Real-World Use Scenarios
- When a compatible DDR4 server is running short on memory, adding this 8GB module can increase capacity and leave more room for the operating system and its services; the actual benefit depends on the server’s supported memory configuration and workload.
- For a small virtualization or home-lab server, the module can add memory for the host and its virtual machines, potentially easing memory pressure; it does not guarantee room for a particular number of VMs, which must be sized for their workloads.
- When replacing a failed or mismatched DIMM in a supported DDR4 server, this module may help restore memory capacity; check the server’s approved DIMM type, population rules, and compatibility before installation.
- In an ECC-capable server used for ongoing services, this ECC memory can be part of a setup that detects and corrects certain memory errors; it does not prevent every hardware fault or replace backups.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Servers that require DDR4 ECC registered memory; not intended for PC computers |
| Memory Speed And Latency | DDR4 3200 (PC4 25600) with CAS latency 22 |
| Memory Configuration | ECC registered memory, 1Rx8 rank, 1.2V |
| Memory Components | Major OEM Samsung, Micron, or Hynix chips |
| Model Identifiers | NEMIX RAM, part number MR25600-818K1-SM-AS-4124GO-NART+ |
Reference Q&A
Q: Should I choose this 8GB NEMIX DDR4-3200 RDIMM or a 16GB module?
A: Choose this 8GB module for a smaller-capacity addition; choose NEMIX’s 16GB DDR4-3200 RDIMM when you want twice the capacity from one module. Both are ECC registered DDR4-3200 memory. The listed 16GB option is 2Rx8, while this 8GB module is 1Rx8, so check your server’s supported capacity and rank configuration before selecting.
Q: Is this 8GB module or a 32GB NEMIX DDR4-3200 RDIMM a better fit?
A: Choose this 8GB module for a smaller memory addition; choose the 32GB NEMIX DDR4-3200 RDIMM when you need more capacity from each occupied slot. Both are 1.2V ECC registered DDR4-3200 modules. The listed 32GB option is 2Rx8, so confirm the system supports its capacity and rank configuration.
Q: Should I add this single 8GB module or choose a matched NEMIX multi-module kit?
A: Choose this single 8GB module for a targeted one-module addition. Choose a matched multi-module NEMIX kit when you want to add more total memory across multiple slots as a set. Check the server’s memory-population guidance to select the appropriate number of modules and capacity.
Q: Will this RAM work in a standard desktop PC?
A: No. This is DDR4 ECC Registered DIMM (RDIMM) server memory, not standard desktop RAM. Use it only in a system that specifically supports DDR4 ECC RDIMMs, and check the motherboard or server specifications before buying.
Q: Can I mix this with the RAM already installed in my server?
A: Only if the server supports the module type and its memory configuration. This stick is a DDR4 ECC RDIMM; do not mix it with unbuffered memory. Check the server manual for supported module types and memory population rules.
Q: Will it run at 3200MHz?
A: The module is rated DDR4-3200 (PC4-25600). Confirm that your server supports this speed and this module configuration before purchasing.
Q: Is one stick enough for a server upgrade?
A: This package contains one 8GB module, so it adds 8GB of RAM. It may suit a compatible server that needs an incremental upgrade, but check your system’s capacity needs and memory-slot configuration first.
Q: Will this NEMIX module work in my server or workstation?
A: Only if the system supports DDR4 ECC Registered DIMMs (RDIMMs) and the specific capacity, rank, and speed. This is an 8GB, 1Rx8, DDR4-3200 RDIMM; check the motherboard and CPU memory specifications before buying. A Reddit discussion about NEMIX memory describes compatibility and boot issues when module and system support do not align.
Q: Can I mix this with my existing server RAM?
A: Possibly, but compatibility is not guaranteed. Check that the system supports the module type and that the existing memory meets the platform’s requirements for speed, rank, and configuration. A Reddit discussion reports uncertainty about mixing NEMIX and Samsung ECC memory, so verify the configuration against your system documentation.
Q: Is this suitable for a regular desktop PC?
A: No. This product is registered ECC server memory, and its listing says it is not for PC computers. Use it only in a system that explicitly supports DDR4 RDIMMs; a matching DDR4 speed or 288-pin connector alone does not establish compatibility.
Q: Is NEMIX RAM a reasonable choice, or should I stick with a familiar brand?
A: Consider it if your server explicitly supports this 8GB DDR4-3200 ECC RDIMM and the price and warranty suit your needs. Reddit users discuss uncertainty about the NEMIX name, but those comments are not enough to establish broad reliability; confirm compatibility and warranty terms before purchasing.














