OWC 128GB (2×64GB) DDR4-2666 ECC Registered RDIMM is a two-module server-memory upgrade listed as compatible with the Synology FlashStation NAS SA6400, for users upgrading supported NAS or server systems that require registered ECC memory.
Recommended For
- SA6400 administrators upgrading to 128GB who can install both 64GB modules as a matched pair and replace any installed 32GB module.
- SA6400 teams running virtual machines or containers that are assessing a move to 128GB for additional memory capacity.
- Enterprise storage administrators using an SA6400 for large shared-file or network-storage deployments who specifically need a 128GB memory configuration.
- IT teams using the SA6400 for centralized backup or VM-storage services who have identified a need for more system memory.
Real-World Use Scenarios
- When an SA6400 is running several virtual machines, an operator can use additional memory to give those VMs more room or run more of them concurrently; actual capacity still depends on the memory layout, CPU, and storage.
- For an SA6400 deployment targeting Synology’s 1 PB RAID 6 volume option, memory expansion can help meet the stated 64 GB memory requirement; confirm the supported module configuration before installing this kit.
- When an SA6400 runs virtual machines alongside containers and other NAS services, extra memory can provide more headroom for concurrent workloads if the system is short on RAM; it does not guarantee faster task completion.
- In a shared-storage environment with many users and simultaneous file-service tasks, added memory may help reduce memory pressure when RAM is the bottleneck; network and drive performance remain important limits.
- For a virtualization test environment, an administrator can allocate more memory across Windows, Linux, or virtual DSM instances, making it easier to keep several test systems available at once, subject to the SA6400’s overall resource limits.
Spec Summary
| Attribute | Value |
|---|
| Best For | ECC-registered memory upgrades for the listed compatible Synology NAS systems |
|---|
| Capacity And Kit Configuration | 128GB kit with two 64GB modules, configured for dual-channel use |
|---|
| Memory Type And Form Factor | DDR4 SDRAM RDIMM, 288-pin DIMM |
|---|
| Speed And Latency | 2666 MHz (PC4-21300) with CL19 latency |
|---|
| ECC And Rank | ECC registered memory, 2Rx4 rank |
|---|
| Voltage And Heat Spreader | 1.2V; no heat spreader |
|---|
| Compatible Devices | FS3400, FS3473, FS3600, FS6463, HD6563, SA3400, SA3410, SA3663, SA3610, and SA6463 |
|---|
| Model Identifiers | OWC part number 2R6D42R4128P; model number OWC2R6D42R4128P |
|---|
Reference Q&A
Q: OWC 64GB (2×32GB) vs. 128GB (2×64GB) for a Synology SA6400—which should I choose?
A: Choose this 128GB kit if you want a 128GB two-module configuration or need more memory capacity for demanding, memory-intensive workloads. The OWC 64GB kit targets a 64GB configuration; Synology’s SA6400 installation guide lists both 64GB (2×32GB) and 128GB (2×64GB) configurations.
Q: Is this 128GB kit a good choice over a 64GB memory configuration for the SA6400?
A: Choose this kit when your target is 128GB total memory rather than 64GB. It includes two 64GB ECC registered DIMMs; Synology’s SA6400 guide lists 128GB for a two-module, 64GB-per-module configuration and 64GB for two 32GB modules.
Q: How does this kit compare with the SA6400’s standard 32GB memory?
A: This kit provides 128GB across two 64GB modules, four times the SA6400’s listed 32GB pre-installed capacity. Choose it when your upgrade goal is substantially more memory capacity; the SA6400 installation guide includes 128GB as a supported two-module configuration.
Q: Is this 128GB kit compatible with the Synology SA6400?
A: It is listed as a replacement for Synology D4ER01-64G and as compatible with the SA6400. The kit contains two 64GB DDR4-2666 ECC Registered RDIMMs. Confirm the NAS’s supported memory configuration and installation rules before buying.
Q: Can I use this RAM in a standard desktop PC?
A: No. This is ECC Registered server memory (RDIMM), not standard desktop memory. Use it only in a system that supports DDR4 ECC RDIMMs.
Q: Can I mix this kit with the RAM already installed?
A: Do not mix it with unbuffered or load-reduced memory. For a multi-module SA6400 configuration, check Synology’s recommended memory rules; matching module specifications alone does not guarantee that a mixed configuration is supported.
Q: What is included, and who is this kit for?
A: The kit includes two 64GB modules, for 128GB total. It is intended for an SA6400 owner who needs DDR4-2666 ECC Registered RDIMM memory; it is not a general-purpose desktop upgrade.
Q: Is this 128GB kit a reasonable upgrade for a Synology SA6400 used for virtual machines?
A: It may suit an SA6400 workload that needs more memory, but the discussion found does not confirm this specific OWC kit or establish how many VMs 128GB can run. The product is listed as two 64GB ECC Registered RDIMMs; check the NAS’s memory requirements and workload before buying.
Q: Can I mix this kit with the RAM already in my NAS?
A: Do not mix it with unbuffered or load-reduced memory. This kit is registered ECC RDIMM, and the product information specifically says it cannot be mixed with those types. Check the installed memory type before adding it.
Q: Should I choose third-party RAM instead of Synology-branded RAM?
A: Third-party RAM can be a lower-cost option, but the discussion emphasizes matching the required memory specifications and checking compatibility. This product is listed as an SA6400 replacement; the Reddit discussion does not independently verify this exact OWC kit.
Q: Is this server memory suitable for a standard desktop computer?
A: No. This is ECC Registered RDIMM server memory, and the product information says it is not compatible with standard desktop computers. Confirm that the target system supports registered ECC DIMMs before purchasing.