Question 1

The description states that there are 3 200mm fans, while the specs and photographs say there are only 2. Which is correct?

Accepted Answer

There are 2 200mm fans included:  one on the front panel that you can see with the blue LED in the picture, and another on the top.  The more obvious fan in the picture is the 140mm fan on the back.  If you look just below the side window, there's space to add a third 200mm fan (not included).  You can also add another 140mm fan on the bottom.

Two 200mm fans included with room for one more.  One 140mm fan included with room for one more.

Question 2

Does it have enough space in between the HD bays and the back for an R9 280x (or similar) graphics card to fit properly (11.6 inch long graphics card)?

Accepted Answer

The distance between the rear of the case and the drive bays is 12 inches. However, there is a 1/2 inch fold back at the edge of the case. You should be able to get the card into the case at an angle and then  align it with the slot. You will need to be very careful with the routing of your wires. If the card has connections to the rear of the card (ie at the Hard Drive end) you would need to avoid drives in the 3.5" slot that is front accessible. this might vary depending on your MB.

Question 3

Does this model of the case come with dust filters?

Accepted Answer

yes ones for the power supply (if it is facing down) and behind the front mesh where the led fan is there is a pretty beefy dust filter

Question 4

Will a triple radiator from Swiftech fit in the top of the case?

Accepted Answer

Not really sure.. still running 3 200mm fans on mines.. But love the tower.. spacious for whatever u want to put in it...

Question 5

side fan 200mm compatible????

Accepted Answer

Yes.  It even fits below some of the tall custom cpu heatsinks, preventing possible collision.

Question 6

Will this case be compatible with the ASRockZ77 Extreme4?

Accepted Answer

if it is a full atx or micro atx board then yes it will fit, also the stand-off screws come pre-installed for the full atx motherboard option

Question 7

Is there a connector at the base of the siding for the extra fan like in the older Armor cases so that I could just buy the optional fan separately and install it on the door myself?

Accepted Answer

Hey Chris,  I just looked in my Armor Revo and I don't see a connector at the base for the door fan. I did not install a door fan because I went with a water cooling system.

Question 8

anyone know if you can fit a PNY gtx770 will fit in there?? its size is 11.2" x 4.376".

Accepted Answer

Yes, I think it will fit.

Brand	Thermaltake
Series	Armor Reve Gene
Model	VO800M1W2N

Type	ATX Mid Tower
Color	Black
Case Material	SECC
With Power Supply	No
Power Supply Mounted	Bottom
Motherboard Compatibility	Micro ATX / ATX
Side Panel	with Side Window

External 5.25" Drive Bays	4
External 3.5" Drive Bays	1
Internal 3.5" Drive Bays	5
Expansion Slots	7

80mm Fans	No
120mm Fans	No
140mm Fans	1 x 140mm Rear Fan
200mm Fans	1 x 200mm Front Blue LED Fan 1 x 200mm Top Fan
Side Air duct	No

Dimensions	20" x 9.9" x 21.6"
Weight	17.2 lbs.

Thermaltake Armor Reve Gene VO800M1W2N Black SECC ATX Mid Tower Computer Case

Thermaltake Armor Reve Gene ATX Mid Tower Computer Case

Features

Unique Design

The Cooling System - Air Cooling

The Cooling System – Liquid Cooling (Optional)

Gallery

What's in the Box

Learn more about the Thermaltake VO800M1W2N

Customer Reviews of the Thermaltake VO800M1W2N

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811133210