Question 1

Has anyone mounted an evga hybrid card in a Fractal Define R6 with this? I'm worried the hoses might be too long or too short.

Accepted Answer

Yes I mounted the EVGA 1080 Ti hybrid card in mine, works just fine. I have my radiator mounted on the top of the case in the rear-most position. The other 2 top fans exhuast. The rear fan and 2 bottom fans are intakes. I also use the EVGA liquid cpu cooler with the 2 fan radiator, that is mounted at the front as an intake. This config works pretty good, while gaming both cpu and gpu only get to about 43 C on average.

Question 2

Would this item work out for the new Radeon 5700XT cards given that they're PCIE 4.0 and if it does, would it throttle the bandwidth of the card given that this is PCIE 3.0?

Accepted Answer

It is just a bridge from the PCI-E slot on the motherboard to the card it will work with PCI-E 4.0 and will not be throttled because (A) Graphics cards have not yet begun to saturate PCI-E 3.0 and (B) It is just a bridge with no controller on it

Question 3

Is this cable can be used for EVGA D7 case?

Accepted Answer

Hello, Thank you for contacting us with your question. We apologize that we are unable to provide you with direct technical assistance; however, we recommend contacting the manufacturer for any compatibility questions. You may be able to chat with someone who may assist you with your question. Hope this information is helpful. Have an Eggcellent Day! Newegg.com

Question 4

Will this riser work with the Define R5?

Accepted Answer

Unfortunately i cannot confirm. If you contant fractal they should be able to answer that question. Any riser card is capable of being utilized with a bit of machining. Howerver the Flex is perfectly fitted for the R6, i had tried a couple of other riser cards and hight of the PCB and placments of the mounting screws was perfect with the Flex VRC 25 where the others were not.

Question 5

Will this work with the coolermaster gpu mount?

Accepted Answer

I apologize i cannot answer this question directly. However, i can say this. Looking at the cooler master GPU mount it looks like some modification with a Dremel or drill might be necessary. The VRC-25 is designed to work with the Fractal cases, and i tried a few cables that didn’t line up correctly, i ultimately decided to wait till this was available. The cable is best riser cable in my opinion. By best advice, if your dedicated to the cooler master mount. Order this, see what needs to be modified ( i would only modify as the mount, not the cable as it is a PCB) and if its something you can do. Awesome! If not return it and see if something else is available. Good Luck, Vertical cards can be awesome, but its still touch go for products that support it and work well together.

Question 6

Does this work well with the Meshify C Case?

Accepted Answer

I installed the vertical gpu riser on the define R6. It mounts easily to display my graphics card. I researched the Meshify C case and it is compatible. But if you do mount it on the power shroud you will not be able to mount you ssd's to the same location.  Best of luck, I hope your custom build treats you well. -Ray

Question 7

Will this work in a Define 7 XL and will it put an EVGA FTW3 3070 or 3080 too close to the glass?

Accepted Answer

The pci slot on the board determines where the card adapter plugs in,
if you have a slot for the vertical mount in your case I would recommend  you mock up your card before you get this Item so that you can see if it will fit to your liking. I know that this is a rather general answer and I am sorry for that but seriously you need to check that your case has a Vertical slot then if it does you should be good to go. but if not you will be modifying or getting a larger case (that I what I had to do) I used a Fractal Design ATX mid Tower It had the required Slot>

Question 8

Will this work with the Node 804 case?

Accepted Answer

The VRC-25 extender and riser are designed for R6 cases, which are pre-drilled for the riser. Probably not room in a Node 804.

Brand	Fractal Design
Model	FD-ACC-FLEX-VRC-25-BK
Type	PCI Express Riser Cable
Color	Black

Length	8.27"
Cable Length	8.27 in.

Connector A	1 x PCIE x16 Female
Connector B	1 x PCIE x16 Male
Connector Number	2

Fractal Design Flex VRC-25 PCIE x16 Extender and Vertical GPU Riser Card Adapter - Black

Learn more about the Fractal Design FD-ACC-FLEX-VRC-25-BK

Customer Reviews of the Fractal Design FD-ACC-FLEX-VRC-25-BK

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16812598001