Question 1

Is this a Windows only tablet or can I run Linux/rasbperry pi on it?

Accepted Answer

This is a multi-interface touch screen monitor rather than a tablet.  It has Display Port, HDMI, and VGA interfaces.  So, as long as the device your connecting has the necessary drivers for multi-touch features, you can connect any device using one of those types of input.

Question 2

How "flat" does the builtin stand allow you to position the monitor?  For a lot of touch work, I need it almost horizontal.

Accepted Answer

It does not lay very "horizontal". The stand is maxed out at 20* deg attached from the middle of the back. It's stands almost vertical. It does have considerably sticky rubber "feet".  I'm using it mounted for a machine.

If you must use this monitor laying down, maybe a laptop stand would work?

Hope that helps.

Question 3

I'm wanting to use this in a scenario where it will be left alone for hours at a time, and then will need to be touch responsive at a moments notice.  Assuming my normal computer sleep modes are set correctly, will this monitor react like I want?  Or does it disconnect the touch feature after a certain period of time?

Accepted Answer

Hmmm.... We have not experienced that. We use ours as a replacement for sound board  sliders for live music. In taht instance, the touch screen function often willnot get toughed for a few hours (we use a remote system most of the time) byut every time we go back it instantly responds to the touch input. Which make sense if you think about it, since the touch screen function is essentially the same as a mouse (The touch screen function is via a USB connection, just like a mouse) which always has high priority interrupts. So, like you indicated, if you set you mouse/ touch screen to never go to sleep, I think you will likely be OK.

Question 4

I would like to use this in a recording booth. Is there a fan and does the monitor make ANY noise?

Accepted Answer

It’s silent, but I haven’t seen a monitor that makes noise since the days of CRT’s, and that was a 20KHhz or so squeal.

Question 5

Does the HDMI input feed output to speakers? Or is the audio jack the only way?

Accepted Answer

Yes, the HDMI input can feed audio to the speakers. You can switch this at any time from within the monitors menu. (Audio via HDMI/DP or though the included stereo input)

Question 6

can a stylus be used with this?

Accepted Answer

It's really just a touch screen.  A basic pointer type stylus would probably work but the screen will not recognize anything powered or intelligent.   I have used powered stylus (styluses, styli) in the past for both mouse functions and for handwriting recognition but this does not appear to have the functionality.

The monitor is in a daily use, kitchen computer and has no keyboard.  Windows10 touch keyboard and mouse functions all work great.

Question 7

Can it stand portrait?

Accepted Answer

Probably could put it on a swing-arm or other VESA mount and use Windows to rotate the orientation to portrait mode using "Display Settings."  The stand folds flat so it would not be in the way if handled that way.  Have not tried it though so not sure if the touch-screen settings would map properly.

Question 8

What wall mount would you recommend for this?

Accepted Answer

It’s VESA 100mm compatible so any mount will work. It’s also a very light monitor so I’d recommend getting the cheapest one you can find with your desired movement requirements.

Question 9

What's included with the monitor in the package?

Accepted Answer

The package includes the PCT2235 Wide Multi-Touch Monitor, Power Cord, VGA Cable, DisplayPort Cable, USB Cable (A to B), Audio-in Cable, and User's Guide.

Question 10

Is this monitor gentle on the eyes during long hours of use?

Accepted Answer

The Planar PCT2235 incorporates blue light reduction presets, which vary blue light levels depending on the activity, enhancing visual comfort when viewing the screen for extended periods of time.

Brand	PLANAR
Model	PCT2235
Monitor Type	Touchscreen Monitor
Touchscreen Type	Capacitive
Cabinet Color	Black

Screen Size	22" (Actual size 21.5")
Resolution	1920 x 1080
Refresh Rate	55 to 75 Hz (60 Hz recommended)
Viewing Angle	178° (H) / 178° (V)
Pixel Pitch	0.248mm
Display Colors	16.7 Million
Brightness	Brightness (w/ touchscreen): 212 cd/m2 Brightness (w/o touchscreen): 250 cd/m2
Contrast Ratio	1000:1
Response Time	14ms

Power Supply	100 - 240 VAC, 50/60Hz
Power Consumption	27W (typ)

Built-in Speakers	2 speakers, 2W/ch
VESA Compatibility - Mountable	100 x 100mm

Attribute	Value
Best For	Interactive Full HD desktop use, including touch-enabled presentations and general viewing
Panel And Resolution	21.5-inch actual-size capacitive touchscreen with 1920 × 1080 resolution, 16.7 million colors, 178° horizontal and vertical viewing angles, and 0.248 mm pixel pitch; brightness is 212 cd/m² with touch and 250 cd/m² without, with a 1000:1 contrast ratio
Refresh Rate And Response	55–75 Hz refresh-rate range, with 60 Hz recommended, and 14 ms response time
Ports And Connectivity	HDMI, DisplayPort, and USB connectors
Audio Setup	Two built-in speakers rated at 2 W per channel
Stand And Ergonomics	VESA mount compatible with a 100 × 100 mm pattern; dimensions with stand are 11.80 × 19.30 × 1.90 inches
Power	27 W typical power consumption; accepts 100–240 VAC at 50/60 Hz
In The Box	Power cord, VGA cable, DisplayPort cable, USB-A to USB-B cable, audio-in cable, and user’s guide
Model Identifiers	PLANAR PCT2235

Planar PCT2235 22" (Actual size 21.5") Full HD 1920 x 1080 DisplayPort HDMI VGA USB Built-in Speakers Frameless Edge-Lit LED Projected Capacitive LCD Touchscreen Monitor

Learn more about the Planar PCT2235

Customer Reviews of the Planar PCT2235

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Recommended For

Spec Summary

Item#: N82E16824016406