Creality Ender-5 Max 3D Printer - CoreXY 700mm/s High-Speed, 400x400x400mm Build Volume, 64-Point Auto Leveling, Dual Z-Axis, WiFi

The Creality Ender-5 Max is a high-speed CoreXY 3D printer built to maximize productivity for makers, small businesses, and print farms that need both large-format capability and reliable, consistent output. An enormous 400 x 400 x 400mm build volume, rarely seen on today's professional CoreXY printers, lets you print oversized single-piece models or batch multiple parts in one job. Powerful 42-76 stepper motors drive the X and Y axes to a typical quality speed of 500mm/s and a maximum of 700mm/s, backed by up to 20000mm/s squared acceleration, so large prints finish in a fraction of the usual time. Print quality starts with a 64-point fully automatic bed leveling system and auto Z-offset, ensuring a perfectly even first layer without manual intervention. A beefed-up rigid frame made from enlarged die-cast aluminum alloy, paired with a precise linear rail on the X-axis, keeps every layer consistent and defect-free. Two independently-motorized Z-axes, each built from dual leadscrews and assisted by two linear rods, work together to carry models up to roughly 5kg with no layer shifting or lines. The extruder uses dual tempered gears rated for over 500 hours of continuous durability testing, supporting 24/7 production runs with minimal downtime. An embedded 1000W heater brings the aluminum alloy heatbed up to 80C, with a maximum of 100C, in about 200 seconds, roughly 3.5 times faster than typical heatbeds, so print jobs can start sooner. The included epoxy resin flexible build plate offers strong first-layer adhesion at lower bed temperatures for better power efficiency while remaining easy to bend for print removal. Designed with print farms in mind, the Ender-5 Max connects over WiFi or LAN for multi-printer management through the Creality Print slicer, with 40+ built-in filament presets and a tri-color indicator light visible from up to 10 meters away for at-a-glance status monitoring. The printer supports 100 to 240V input voltages worldwide with built-in double safety fuses on the heatbed, plus auto-load and unload filament switching, active input shaping to reduce vibration and ringing, an 8G ROM for storing print files, and a silent mode that keeps noise at 55dB or lower. A filament runout sensor and power loss recovery protect long print jobs from interruption. Control is handled through a 4.3-inch color touch screen, and file transfer is available via USB drive or WiFi. The Ender-5 Max supports Hyper PLA, PLA, PETG, TPU95A, ABS, ASA, PLA-CF, PA, and PLA-Silk filaments through a 1.75mm direct drive extruder with a 0.4mm nozzle, compatible with optional 0.6mm and 0.8mm nozzles. Optional accessories include an enclosure kit for a warmer printing environment with engineering filaments and reduced noise, plus a full HD 1080p camera for real-time monitoring and time-lapse photography. Backed by a rigid metal frame, wide 5-40C operating temperature range, and a comprehensive feature set built for volume production, the Creality Ender-5 Max delivers professional-grade speed, size, and reliability in a CoreXY 3D printer.