Anycubic Water-Wash Resin 2.0 | Gray, 1kg | Water Washable 405nm UV 3D Printer Resin, No IPA Needed
- Clean with Water, No IPA: A hydrophilic formula lets you wash prints with plain water instead of isopropyl alcohol, for a simpler, lower-cost, and more eco-friendly post-processing workflow.
- High Precision for Miniatures: 0.15mm surface detail precision and low shrinkage capture intricate features on miniatures, figurines, and architectural models.
- Tough & Crack Resistant: Elongation at break of 16-22% and Izod impact strength of 133 J/m resist fractures, while reduced water absorption helps models keep their color and structure on long-term display.
- Reliable in Cooler Rooms: Stays low in viscosity even at 15-20°C for smooth flow, consistent bed adhesion, and high success rates, with fast 2-2.5 s normal exposure.
- Low Odor, Wide Compatibility: Minimal-odor formula works with all LCD/DLP 3D printers using 405nm UV light-curing and performs best with Anycubic printers. RoHS and REACH compliant.
Any questions? Ask CelesteSM will help you find out quickly.
Anycubic Water-Wash Resin 2.0 Grey for LCD/DLP 3D Printers, 1kg Bottle
Anycubic Water-Wash Resin 2.0 is a water-washable UV photopolymer resin that makes resin 3D printing cleaner, simpler, and more affordable. Its hydrophilic formulation lets you remove residual resin from prints with plain water, so there is no need to buy, store, or handle isopropyl alcohol (IPA). The result is a safer, lower-cost, and more eco-friendly workflow that does not compromise print quality.
Print quality is built for detail. With 0.15mm surface precision and low shrinkage, this resin captures the intricate features demanded by miniatures, tabletop figures, and other highly detailed models. Cured prints are also durable: elongation at break of 16-22% and an Izod impact strength of 133 J/m help models resist fractures and cracks. An optimized formula reduces water absorption, so models hold their vivid colors and structural integrity over long-term display.
The resin maintains low viscosity even at 15-20°C, delivering smooth flow, consistent build plate adhesion, and stable, high success rates in unheated or cooler rooms. A recommended normal exposure of just 2-2.5 seconds keeps print times short, and the minimal-odor formula creates a more pleasant printing environment.
This 1kg bottle of Gray Water-Wash Resin 2.0 is compatible with all LCD/DLP 3D printers that use 405nm UV light-curing technology and works best with Anycubic printers. Wash parts in water for at least 5 minutes, dry them fully, then post-cure for about 3 minutes. Do not pour wash water down the drain; let it cure in sunlight and dispose of it as solid plastic waste. It is ideal for anime and game figurines, architectural models, and appearance and structural prototypes.
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies
- Return for refund until: January 31, 2027
- Return for replacement until: January 31, 2027
- This item is covered by Newegg.com's Extended Holiday Return Policy.
- Read full return policy for details.
We want to ensure your holiday shopping this year is hassle-free. That’s why we’re automatically extending our return policies on almost every product! For purchases placed between November 1st, 2026 and December 31, 2026 you will have until January 31, 2027 to return your product.
Manufacturer Contact Info
Anycubic Water-Wash Resin 2.0 is a 1 kg gray, 405 nm UV-curing 3D printer resin for LCD/DLP printers. It suits makers printing miniatures, figurines, and architectural models who want fine detail and water-based cleanup after printing.
Recommended For
- Hobbyists printing display figurines or paint-ready models who want to wash prints with water instead of keeping an IPA wash bath; the models are mainly for display rather than frequent handling.
- Architectural-model and appearance-prototype makers printing detailed parts that will be inspected or displayed, rather than repeatedly flexed or exposed to heavy impact.
- Home resin-printing hobbyists who specifically want to avoid an IPA wash step and have a separate container and suitable plan for collecting resin-contaminated rinse water.
- Owners of compatible 405 nm LCD or DLP resin printers who are willing to calibrate exposure settings and test a sample before printing a full batch.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Water-washable UV resin printing with light-curing systems in the 365–405 nm range |
| Resin Type, Color And Package | Water-washable resin in gray (hex #7E93A7), supplied in a 1 kg package |
| Print Setup | Shake well before use; print environment 20–40 °C, print temperature 20–50 °C, first-layer exposure 25–40 s, and normal exposure 2–2.5 s |
| Resin Composition And Physical Properties | Hydrophilic group-modified light-curing resin; wavelength 365–405 nm, viscosity 190–230 mPa·s at 25 °C, and density 1.07–1.09 g/cm³ |
| Mechanical Properties | Hardness 82–85 HD; tensile strength 38–43 MPa; elongation at break 16–22%; bending modulus 48–60 MPa; bending strength 2,300–3,000 MPa; Young’s modulus 1,100–1,300 MPa; Izod impact strength 133 J/m; volume shrinkage 2.2–5.5% |
| Cleaning And Post-Curing | Water washing: medium, at least 5 min; 95% IPA cleaning is also listed, for at least 3 min. UV post-cure at 405 nm for 3 min, at 18–30 °C and 25,000–30,000 µW/cm²; dispose of post-cured resin as plastic waste |
| Model Identifiers | Anycubic Water-Wash Resin 2.0; part number SSX2GY-103A |
















