Specifications: Required to mount mounting solutions and peripherals to the command post
Can be used with 200, 300, 400 Series and HD Pivot
Post is 3" by 3"
Specifications: Screen: <= 34.00"
Lift: 13.00" (33.00 cm)
Tilt Range: 70 degrees backward, 5 degrees forward
Pan: 360 degress
Rotation: 360 degrees
VESA: MIS-D
Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm)
Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm)
Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
Specifications: Description: Interface Bracket Kit (aluminum); aka T-Slot Bracket Kit
Includes: (1) Angled T-Slot Interface Bracket, (2) Light-Duty T-Slot Brackets, mounting hardware, manual
Light-Duty Brackets can be used with most Ergotron carts; Angled Interface Bracket can be used with Neo-Flex Mobile WorkSpace Carts, Mobile MediaCenters, StyleView 31/32 Carts and WorkFit C-Mod Workstations
Install either the Angled Interface Bracket or the Light-Duty Brackets; to deploy both types of brackets on a cart requires two kits
Consideration should be given to weight of component being mounted relative to its height on cart to avoid tip hazard