Features: This power extension cord is made by DEALTUS and features a style with material. It supports a voltage of 125 volts and an input current of . The cable is black in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries.
Specifications: Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or, telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference.
Features: 251 Drawing & Cutting Designs
3.47" LCD Touchscreen Display
Built-in Scanner
Maximum scanning width: 11.7 inches
Cuts up to 3mm thick
Wireless connection
Work area: 12 inches x 12 inches
Editing on CanvasWorkspace
Compatible with the Artspira app
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating.
These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.
Installation Instructions:
-Make sure the chip modules are free from dirt and gre...