Mobile Rack Drives Support: 1 x 3.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II
Specifications: Hard Drive Compatibility: 3.5-Inch SATA/300(SATA II) or SATA/150 (SATA I) Hard Drives
System Requirements: PC or Mac with a 5.25 Inch Drive Bay
Drive Drawer Dimensions: 7.5" x 5.8" x 1.6"
Cooling Fan: Ball-Bearing Fan
Fan Dimensions: 40 x 40 x 10mm
Fan Enclosure: Plastic
Drive Drawer Enclosure: Aluminum
Drive Size: Supports up to 750Gb hard drive
Note: Unit is model specific and is not meant for use with different models of drive drawer unless otherwise stated
Specifications: 4Kn Support: Yes
General Specifications: Not compatible with M.2 SATA or AHCI based SSDs
Maximum Data Transfer Rate: 10 Gbps
MTBF: 233,398 Hours
TRIM Support: Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
NVMe (PCIe Gen 3)
UASP Support: Yes
Host Connectors:
1 - M.2 (PCIe, M-Key, NVMe, NGFF)
1 - USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps) Female
Dimension: 4.30" x 1.60" x 0.50"
Weight: 2.30 oz.
Specifications: Connector Types: 1 - IDE 40 pin Male
Connector Types: 1 - SATA Data 7 pin Plug
Connector Types: 1 - SATA Power Plug
Connector Types: 1 - SP4 Male
Enclosure Type: Steel
LBA support: 48-bit
Product Height: 1.02 in [26 mm]
Product Length: 3.98 in [101 mm]
Product Weight: 3.67 oz [104 g]
Product Width: 3.07 in [78 mm]
Humidity: 8% ~ 90% RH
Operating Temperature: 5°C to 80°C (41°F to 176°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Chipset ID: JMicron JM20330
OS Compatibility: OS independent; No software or drivers required
Specifications: Drive Connectors: 4 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors: 1 - USB Type-B (9 pin) USB 3.0 Female
Other Interface(s) : 1 - DB 9-pin Serial Male
Specification: Back Door Construction: Steel Mesh
Casters: Included
Fan(s): No
Frame Type: Enclosed Cabinet
Front Door Construction: Steel Mesh
Front Door Key Lock: Yes
Rack Type: 4-Post
Side Panel Construction: Steel Mesh
Wallmountable: No
External Depth 33.6 in [853 mm]
External Height 46.1 in [1170 mm]
External Width 23.6 in [600 mm]
Maximum Mounting Depth 30.7 in [780 mm]
Minimum Mounting Depth 3 in [76.2 mm]