Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity of up to 6TB.
Backward compatible with USB 2.0/1.1.
DC Power Supply 12V included for 3.5" devices.
On/Off Switch for HDD protection.
Pluy & Play, reliable and stable.
Ports: 3 x USB 3.0 A (Fast-Charge, 9 pin, SuperSpeed) Female, 1 x USB Type-C (24 pin) USB 3.0 Female
Power Input: Center Tip Polarity: Positive
Input Current: 1A
Input Voltage: 100 - 240 AC
Output Current: 4A
Output Voltage: 5 DC
Plug Type: B
Power Consumption (In Watts): 20
Power Source AC: Adapter Included
Specifications: Maximum Analog Resolutions: 1920 x 1080
Maximum Digital Resolutions: 1920 x 1080
Supported Resolutions: 1920x1080 (1080p) @ 60Hz
Wide Screen Supported: Yes
Note: This adapter will not work with Samsung Chromebooks
Humidity: 40% to 85% RH Non-Condensing
Operating Temperature: 0 to 60 degree C
Storage Temperature: -10 to 70 degree C
Specifications: Network Technology: 1000Base-TX, 1000Base-T
Power Description Plug/Connector Type: Terminal Block (3 Wire), Type N
Expansion Slot Type: SFP (mini-GBIC)
Number of SFP Slots: 1
Total Number of Expansion Slots: 1.0
Network (RJ-45): Yes
Number of PoE (RJ-45) Ports: 1
Total Number of Ports: 1
Media Type Supported: Twisted Pair
Fiber Mode Supported: Optical Fiber, Single-mode, Multi-mode
Weight (Approximate) 2.80 oz
Height 1.9", Width 1.4", Depth 2.3"
Environmental Compliance: Restriction of Hazardous Substances (RoHS), Waste Electrical and Electronic Equipment Directive (WEEE)
Specifications: These hard drive adapters convert SATA or IDE interfaces to USB, enabling external connection of hard disk drives (HDDs) or optical drives to computers without SATA/IDE ports