"heatsink"

• Block Compatibility: M.2 SSD
• Model #: Heatsink 22x70x3

(12)

• Brand: ASUS
• CPU Socket Type: AM5
• Chipset: AMD X870E
• Serial ATA (SATA): 4 x SATA 6Gb/s
• Model #: ROG CROSSHAIR X870E DARK HERO

Limited time offer, ends 07/27

• Model #: M2HT8-B

• Model #: SLGJ-1255

• Brand: Unique Bargains
• Model #: s21072000ux1505

Limited time offer, ends 07/26

• Brand: Adiven
• Type: cooler
• Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. 10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
• Model #: AD-M2CL722

• Brand: Unique Bargains
• Color: Silver Tone
• Model #: a21012600ux0650

• Model #: DZ-M.2 Cooler-004

(251)

• Max Sequential Read: Up to 7200 MBps
• Max Sequential Write: Up to 4400 MBps
• 4KB Random Read: Up to 720,000 IOPS
• Form Factor: M.2 2280
• Model #: XG7000-512-FB 2280

(16)

• CAS Latency: CL16
• Timing: 16-20-20-38
• Recommend Use: AMD & Intel Compatible
• Buffered/Registered: Unbuffered
• Model #: SLDDR416G3200*2

• Bearing Type: Fluid Circulative Bearing
• Air Flow: 25-30 CFM
• Noise Level: 1 - 5 dBA
• Model #: 18774-hcxWIbSsW

• Model #: 117C5PY26Jun12HYH

Limited time offer, ends 07/25

• Model #: C783-Y3-WXY-Q2-701380

• Model #: 4H98DHG

• Model #: WUQ5FJK51857

• Model #: sss-1014

• Model #: a21012600ux0708

Limited time offer, ends 07/25

• Model #: LJX-PCI-0096

• Model #: sss-199

Limited time offer, ends 07/25

• Model #: 9SIC2ZPKKU9666

Limited time offer, ends 07/25

• Type: Radiator
• Block Material: Aluminum
• Radiator Material: Aluminum
• Model #: FSSHSCM2NC

Limited time offer, ends 07/25

• Model #: PCI-830-00096

Limited time offer, ends 07/25

• Model #: ZZM-QOS-DA41702

• Model #: LLMLL-061

• Model #: 2604ADD8D54

• Model #: CCOOC-0041093

• Model #: 508922631291

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

• Brand: Unique Bargains
• Model #: s21072000ux1527

• Model #: 1-CPUThermal0185

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Di...
• Model #: 11-001-049

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
• Dim...
• Model #: 11-001-060

• Brand: Noctua
• Fan Size: 140mm
• Type: Fan & Heatsinks
• RPM: 1500 RPM
• Model #: NH-D15 G2 chromax.black

• Brand: Noctua
• Fan Size: 140mm
• Bearing Type: SSO2
• Type: Fan & Heatsinks
• Model #: NH-D15

• Brand: Noctua
• Fan Size: 140mm
• Type: Heatsinks only
• RPM: 0 - 1500 RPM
• Model #: NH-D15 G2 LBC

• Bearing Type: Fluid Circulative Bearing
• Air Flow: 25-30 CFM
• Noise Level: 10 - 15 dBA
• Model #: 36047-vPoAUNZC1