Primary Ports: 48 x 10/100/1000Base-T 802.3at (30W) ports
• Full/Half-Duplex (autosensing)
• MACsec-capable
8 x 1Gb SFP uplink ports (includes 2 x Stacking ports @ 10Gb)
• Can be upgraded to 10Gb SFP+ via software license
• MACsec-capable
• 100Mb operation supported on last 4 uplink ports
1 x Serial console port (RJ-45)
1 x USB A ports for management or external USB flash
1 x USB Micro-B console port
PoE: All 5320 models support 30W PoE that conforms with IEEE 802.3at. This enables the 5320 to address the needs of powered edge devices, while eliminating the need for additional electrical cabling and circuits. In addition, 5320 PoE models support perpetual and fast PoE for even more efficient and reliable powered edge device operation.
Additional Features: Ethernet Switch: An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE- T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC.An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE- T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC.
Specification: Maximum of supported line and programmable line keys:
128
Maximum of supported SIP lines:
130 for CUCM and Webex DI
16 for Webex Calling and Open SIP platforms
Hard keys:
Action button
Favorite button
Hold/Resume key
Transfer key
Conference key
Application key
Directory...
Antenna: Integrated down tilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 5.3 dBi in 2.4 GHz, 6.0 dBi in 5 GHz (5.8 dBi in dual-5 GHz mode) and 6.0 dBi in 6 GHz (5.9 dBi in dual-6 GHz mode). Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The down tilt angle for maximum gain is roughly 30 to 40 degrees.