Specifications: An economical wiring solution. Carries both data and power over a single Ethernet cable
Powers 802.3at and 802.3af compliant devices
Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs
Enables you to avoid installing AC power at a remote camera, access point, or thin client
Move equipment from room to room without costly, time-consuming rewiring
Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output
Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications)
Diagnostic LEDs indicate 802.3at device detection and alert you to faults
Backward compatible with 802.3af standard equipment
Simple plug-and-play insta...
Frequency Band: Operating frequency* 57–71 Ghz
* Depends on regulatory region.
Channel bandwidth 2160, 1080 MHz
Polarization Vertically linear
Beamwidth Azimuth: 3 dB 1.6°
Elevation: 3 dB 1.6°
Security: WPA2-PSK (AES)
Transmitted Power: Max. throughput 1.95 Gbps
Max. range 12+ km
Power Supply: Max. power consumption 22W
Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply 48V DC, 0.65A gigabit PoE adapter (Included)
Supported voltage range 44–54V DC
22–27V DC
Wireless Data Rates: 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)
Interface: 1 x Gigabit Ethernet uplink (10/100/1000BASE-T autosensing), PoE
3 x Gigabit Ethernet local ports (10/100/1000BASE-T), including one PoE out port:
PoE out provides 802.3af (Class 0) when access point is powered by 802.3at, or no output when powered by 802.3af
One passive pass-through port, RJ-45 (back to bottom)