Specifications: Hardware Version: version 2
Interface:
"Data" Input Port:1 x RJ-45 STP
"PoE (Data+Power)" Output Port:1 x RJ-45 STP
DC 56V Input Power Socket:1
LED Indicator:
System: Power x 1 (Green)
PoE Port: PoE in Use x 1 (Green)
Network Cable:
10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.)
EIA/TIA- 568 100-ohm STP (100m)
Data Rate: 10/100/1000 Mbps
Unit Input Voltage: DC 56V, 0.53A
Power Requirements: 100-240V AC, 50/60 Hz
Power Consumption: 30 watts (max).
Number of devices can be powered: 1
Standards Compliance:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at High Power over Ethernet
Specifications: An economical wiring solution. Carries both data and power over a single Ethernet cable
Powers 802.3at and 802.3af compliant devices
Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs
Enables you to avoid installing AC power at a remote camera, access point, or thin client
Move equipment from room to room without costly, time-consuming rewiring
Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output
Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications)
Diagnostic LEDs indicate 802.3at device detection and alert you to faults
Backward compatible with 802.3af standard equipment
Simple plug-and-play insta...