Features: • IP30 rated industrial power supply with integrated DIN-rail mount
• Provides up to 120 Watts of power (48 V, 2.5 A)
• Built-in active PFC (PF > 0.93)
• Short circuit/overload/over voltage/over temperature protection
• High efficiency (91%) design
• UL 508 approved
• 100 % full load burn-in test
• Extreme -25 to 70 °C
Features: • Industrial power supply with integrated DIN-Rail mount
• Provides up to 150W of power (48V DC, 3.12A)
• Supported output voltage 48 – 56V DC
• High efficiency 93% and low power dissipation
• 150% peak load capability
• Built-in active Power Factor Controller (PF > 0.96)
• Cooling by natural air convection
• Protections: Overload, short circuit, over power, over voltage, over current,
Network Media: WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)
NAT Loopback Enable/Disable
NAT Modes: NAT, PAT, One-to-One NAT
VLAN tag assignment on WAN interface
IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP
Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels
IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6),...
Ports: 1 x Gigabit PoE+ port
1 x 100/1000Mbps SFP slot
Power Adapter: Power
Input: 48-56V DC
Compatible power supply: TI-S12048 (sold separately)
Consumption: 2 watts (without PoE) with 48V DC input
PoE
Mode A (V+ 1, 2; V- 3,6)
Budget: 30 watts
Consumption: Max. 36 watts with 56V DC input
Features: • Hardened IP30 rated Gigabit PoE++ Injector
• PoE (15.4W), PoE+ (30W), or PoE++ (90W) power
• Network a PoE device located up to 100m (328 ft.) away
• Extreme -40 to 75 °C (-40 to 167 °F) operating temperature range
• Redundant power inputs with overload current protection
• Includes DIN-rail mount and wall mount
• Power supply sold separately (model TI-S15052,
Specifications: Standards:
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
Device Interface:
1 x Gigabit port
1 x PoE+ Gigabit port
4-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Data Transfer:
RateEthernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Power:
Input: 48 – 56 V DC
Compatible power supply: TI-S12048 (sold separately)
Consumption: Max. 72 Watts
PoE budget: 60 Watts
Pin 1,2 for power+ and pin 3,6 for power- (mode A)
Pin 4,5 for power+ and pin 7,8 for power- (mode B)