Speed: 1. Fill the water tank with warm water. 2. Choose the desired mode and adjust water pressure. 3. Lean over the sink and place the tip in your mouth. 4. Close lips around the tip and turn on the device. 5. Move the tip along your teeth and gums, pausing briefly on each tooth. 6. After use, clean the tip and water tank, and store the device properly.
Speed: 1. Remove the water tank and fill it with warm water. 2. Place the selected tip onto the irrigator. 3. Turn on the device and adjust the water pressure using the mode button. 4. Lean over the sink and place the tip into your mouth at a 90-degree angle. 5. Close your mouth slightly and turn on the water flow. 6. Move the tip along your gum line and teeth, pausing briefly on each tooth. 7. After use, remove the tip and rinse it under clean water. 8. Detach the water tank and clean it thoroughly. 9. Always store the device with the water tank detached and the tip removed. 10. Always use the device as instructed and keep it out of reach of children unless supervised. 11. Start with the lowest setting if you're a beginner or have sensitive teeth. 12. Charge using a 5V 1A adapter (adapter ...
Speed: 1. Fill the water tank with lukewarm water. 2. Attach the desired tip securely. 3. Select the preferred pressure setting or cleaning mode. 4. Lean over the sink, place the tip in your mouth, and turn on the device.5. Guide the tip along the gumline and between teeth, allowing water to clean each area. 6. Empty any remaining water from the tank after use. 7. Rinse the tip thoroughly and store the device in a dry place. NOTE: First-time users should start at lowest pressure setting and gradually increase over time.