Speed: 1. Remove the tip from the handle. 2. Fill the water tank with warm water. 3. Reattach the tip to the handle. 4. Adjust the water pressure using the mode selector. 5. Lean over the sink and place the tip in your mouth. 6. Turn on the device and close your lips to form a tight seal. 7. Move the tip along your gum line, pausing briefly on each tooth. 8. After use, remove the tip and rinse both the tip and the handle. 9. Allow the unit to air dry. 10. Store the unit with the tip off and the tank empty.
Speed: Fill the 300ml tank with water, attach the nozzle securely, and charge the battery. Use one of the 4 modes for water pressure and place the irrigator tip at a 90-degree angle against teeth and gums, starting with the lowest setting. After use, rinse the unit with water, let it dry, and ensure the nozzle covers the sealing rubber ring to prevent water leakage.
Speed: 1. Charge the device. 2. Fill the water tank. 3. Select a cleaning mode. 4. Lean over a sink. 5. Aim the flosser tip at the gumline. 6. Turn on the device.
Speed: 1. Fill the 320ml water tank with warm water. 2. Choose your preferred mode (Normal, Pulse, DIY, Soft, or Stepless) and adjust water pressure from 60 to 200 psi. 3. Place the selected nozzle tip into the water flosser and position it at a 90-degree angle to your teeth. 4. Turn on the device and move the tip along your gum line and between teeth. 5. After use, remove the tip, rinse it under water, and store it in the provided case. 6. Clean the water tank and base after each use to prevent bacterial growth. 7. Charge the device for 3 hours before first use and every 42 days of use in soft mode.
Speed: For any issues, contact RUMFFLYE’s official after-sales support team—we will resolve all your inquiries.Usage Instructions:1. Fill the 300ml detachable water tank with lukewarm water. 2. Choose one of the 8 DIY modes or 4 professional settings using the one-touch mode switch. 3. Adjust water pressure from 20-120 PSI according to your preference and gum sensitivity. 4. Place the selected tip into the 360° rotating nozzle and turn on the device. 5. Close your mouth slightly and let water flow naturally into the sink to avoid splashes. 6. Maneuver the irrigator tip around your teeth, implants, and braces, ensuring it reaches deep between them. 7. After use, remove the tip and rinse both the tip and the unit with warm water. 8. Allow the unit to air dry completely before storing it. 9. Cha...