Bietrun Wireless XLR Transmitter Receiver with 48V Phantom Power, Wireless Microphone XLR Adapter with 30 Channels, UHF 230 ft Range, for Dynamic and Condenser Microphone, Mixer, Audio Interface

48V Phantom Power: Bietrun WXM29A transmitter and receiver system comes with 48V phantom power, providing 48V of power for your dynamic or condenser professional microphone. How to turn it on 48V : Click the power button once, and then press and hold the power button again until the display shows 48V to turn it on.
100 ft to 230 ft Stable Transmission Range:The XLR wireless microphone system operates on the UHF frequency band, providing a reliable indoor transmission range of up to 100ft/50m and an outdoor range of up to 230ft/70m.Additional Technical Specifications: Frequency Stability: <0.002%. Sensitivity: 2mV. Signal-to-Noise Ratio: >95dB. Interference Rejection Ratio: >90dB.
30 Adjustable Channels:30 Adjustable Channels: To change the channel (when powered on) and prevent interference, simply press the transmitter's power button twice. (Please ensure usage within legally designated signal bands with a US FCC ID.) Supports simultaneous use of 20-30 wireless XLR receiver and transmitter systems, ensuring each system operates on distinct channels.
Rechargeable and Long-Time Working:Both the wireless microphone transmitter and receiver feature built-in 1000mAh rechargeable lithium batteries, offering 8 hours of operation with just a 3-hour full charge. The included 2-in-1 charging cable allows simultaneous charging of both the transmitter and receiver.
Easy to Use:Both the receiver and transmitter come with XLR plugs and an included XLR to 6.35mm adapter.Compatible with a wide range of microphones, including dynamic mics, harmonic microphones, audio mixers, PA systems, active loudspeakers and more, compatible with SM58/7B/MV7/SM57, E 945/835/935, AT2020/2040/2035 series, and many others.Ideal for various settings, including venues, weddings, and mobile DJ setups.
Use Multiple Sets At the Same Time: Channel Lock:1. Turn off the receiver and transmitter. 2. Turn on the receiver only. 3. Keep pressing the receivers switch turn on to ID SYNC is displayed. 4. Wait for the receiver and transmitter to connect automatically.(When using multiple wireless XLR systems simultaneously, each set must be assigned a unique locked channel, and the channel numbers cannot be the same.)
Get Rid of XLR Cables: This receiver and transmitter combo can also function as a wireless XLR transmission cable, liberating you from the constraints of traditional XLR cables. (Please note: When used for audio transmission, switching the receiver to audio mode is essential.)