Your Browsing History
- Free 30-day Returns
$6.99
Meet Your Seller
Visit JacobsParts Store
FOLLOW
NodeMCU Lua ESP8266 ESP-12F CP2102 Arduino compatible wifi development board
- You may need the CP2102 driver available from the Silabs website. It is free and easy to install.
- This board features the ESP8266 ESP-12F but has all of its pins broken out. This enables the ESP8266 to be breadboard compatible. It also has an integrated micro-usb port which makes powering and programming the chip far easier compared to having to use a usb-to-serial adapter.
- The NodeMcu firmware can be loaded easily if you want to develop programs in Lua. It is also compatible when other leading micro-controller development platforms.
- This board has a female Micro-USB port on the board for power and program uploading. This port type is very common on many consumer electronics and on smartphones.
- Flashing this device is easy. To flash, just hold the flash button and perform the flash using firmware programming software.
+
+
Overview
Specs
Reviews
Uses CP2102
NodeMCU has built-in USB-TTL serial with reliable industrial strength CP2102
CP2102 provides superior stability on all supported platforms
Communication interface voltage: 3.3V
Antenna type: Built-in PCB antenna is available
Wireless 802.11 b/g/n standard
WiFi at 2.4GH z, support WPA / WPA2 security mode
Support STA/AP/STA + AP three operating modes
Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8,
SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD 0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous
transmission: 70mA (200mA MAX), Standby: <200uA
Logical current: 0mA-36mA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Support Smart Link Smart Networking
Working temperature: -40 Cel. ~ + 125 Cel.
Drive Type: Dual high-power H-bridge driver
ESP8266 has IO Pin
Don't need to download resetting
A great set of tools to develop ESP8266
Flash size: 4 MByte
NodeMCU has built-in USB-TTL serial with reliable industrial strength CP2102
CP2102 provides superior stability on all supported platforms
Communication interface voltage: 3.3V
Antenna type: Built-in PCB antenna is available
Wireless 802.11 b/g/n standard
WiFi at 2.4GH z, support WPA / WPA2 security mode
Support STA/AP/STA + AP three operating modes
Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8,
SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD 0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous
transmission: 70mA (200mA MAX), Standby: <200uA
Logical current: 0mA-36mA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Support Smart Link Smart Networking
Working temperature: -40 Cel. ~ + 125 Cel.
Drive Type: Dual high-power H-bridge driver
ESP8266 has IO Pin
Don't need to download resetting
A great set of tools to develop ESP8266
Flash size: 4 MByte
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- This item is covered by JacobsParts Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...