
- In order to extend the life of the backup camera as long as possible, we equipped the bracket with stainless steel, even every screw is stainless steel.
- It can adjusts 1.57inch/4cm left and right without blocking the trunk switch. Rubber gaskets are added to prevent wear and tear on the car paint.

IP69K Internal Glue Waterproof
Fully sealed with a nano-infusion process that makes the rear view camera resistant to high-pressure water gun impacts and the entry of rain and snow.

6 All-glass Lenses
Glass lenses of the rear view camera are far more transmissive and wear-resistant than plastic, can transmitting 99% of light and working at 300°.

F1.5 Large Aperture Lens
The reverse camera for car uses a high sensitivity sensor for more light intake and ensures clear images in low-light environments without LED lights.

Extra Larger 1/2.7in CMOS Chip
The back up camera for cars uses the 2024 latest 1/2.7in 3D noise reduction chip instead of the normal 1/4in, which supports amazing vision!

145° Optimal Viewing Angle
The view of car backup camera is large enough to see well behind the car without distortion, so you'll enjoy a 100% realistic picture when backing up!

Automatically Balanced
The license plate backup camera rear camera for car can balance between day and night effects to maximize the restoration of true colors.

Extended RCA Shielded Cable
With 26.3ft RCA shielded cable, you don't need to worry about video signal attenuation, which can ensure stable signal of backup camera license plate.

Simple Installation
The AHD backup camera can be installed by receiving the video signal through the car screen and accessing the power supply through the reverse lights.
IMPORTANT NOTICE

How to Switching Mode of the Backup Camera
1. Show guide line: please cut off the white wire loop.
2. Change to front view: please cut off the green wire loop.
3. If the screen supports AHD signal, please cut off the orange wire to swith to AHD.
The screen with RCA interface 100% supports HD signal,but only a few screens supports AHD, so please confirm whether the screen supports AHD signal before cutting the orange wire


Included In the Package
- PixelMan AHD Backup Camera for Car PAHD-2A
- Brackets × 2 (Includes stainless steel screws and rubber gaskets)
- RCA Cable (26ft/8m),
- Cable Ties × 5
- User Manual
Comparison


- In order to extend the life of the backup camera as long as possible, we equipped the bracket with stainless steel, even every screw is stainless steel.
- It can adjusts 1.57inch/4cm left and right without blocking the trunk switch. Rubber gaskets are added to prevent wear and tear on the car paint.

IP69K Internal Glue Waterproof
Fully sealed with a nano-infusion process that makes the rear view camera resistant to high-pressure water gun impacts and the entry of rain and snow.

6 All-glass Lenses
Glass lenses of the rear view camera are far more transmissive and wear-resistant than plastic, can transmitting 99% of light and working at 300°.

F1.5 Large Aperture Lens
The reverse camera for car uses a high sensitivity sensor for more light intake and ensures clear images in low-light environments without LED lights.

Extra Larger 1/2.7in CMOS Chip
The back up camera for cars uses the 2024 latest 1/2.7in 3D noise reduction chip instead of the normal 1/4in, which supports amazing vision!

145° Optimal Viewing Angle
The view of car backup camera is large enough to see well behind the car without distortion, so you'll enjoy a 100% realistic picture when backing up!

Automatically Balanced
The license plate backup camera rear camera for car can balance between day and night effects to maximize the restoration of true colors.

Extended RCA Shielded Cable
With 26.3ft RCA shielded cable, you don't need to worry about video signal attenuation, which can ensure stable signal of backup camera license plate.

Simple Installation
The AHD backup camera can be installed by receiving the video signal through the car screen and accessing the power supply through the reverse lights.
IMPORTANT NOTICE


How to Switching Mode of the Backup Camera
1. Show guide line: please cut off the white wire loop.
2. Change to front view: please cut off the green wire loop.
3. If the screen supports AHD signal, please cut off the orange wire to swith to AHD.
The screen with RCA interface 100% supports HD signal,but only a few screens supports AHD, so please confirm whether the screen supports AHD signal before cutting the orange wire

Included In the Package
- PixelMan AHD Backup Camera for Car PAHD-2A
- Brackets × 2 (Includes stainless steel screws and rubber gaskets)
- RCA Cable (26ft/8m),
- Cable Ties × 5
- User Manual
Comparison
![]() PAHD-2A | ![]() PMHD05A | ![]() PMD2A-B | ![]() PMG3A-B |
|---|---|---|---|
| Customer Reviews | |||
| — | — | — | — |
| Price | |||
| — | — | — | — |
| Installation | |||
| 2 brackets (one stainless) | 2 brackets | 1 mount | Drill a hole for installation |
| Output Pixel | |||
| Maximum 1280*720P | Maximum 1280*720P | Maximum 1920*1080P | Maximum 1920*1080P |
| Chip Size | |||
| 1/2.7inch large size | 1/2.7inch large size | 1/2.7inch large size | 1/2.7inch large size |
| Lens | |||
| 145° wide angle | 170° wide angle | 170° wide angle | 170° wide angle |
| Waterproof Level | |||
| IP69 | IP69 | IP69 | IP69 |
| Adaptive devices | |||
| RCA interface screen | RCA interface screen | RCA interface screen | RCA interface screen |








































