Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Material 12 pcs addressable RGB LED with magnetic strip and adhesive tape
Pin definition:
+5V, D, G*
+5V, D, NP, G*
Included Parts:
2 x Addressable RGB LED strip
1 x Motherboard connect cable**
1 x Splitter cable
Length: 300mm
Wattage: 3W (5V, 0.6A)
Tandem limits: Depend on controller
Remark:
* Please check the control box and motherboard pin header that you want to connect are the same as LS03’s pin definition.
** Included Motherboard connect cable supports SilverStone’s addressable RGB 3pin connectors and other market standard addressable RGB 3pin (three pin in four pin housing) connectors.
Specifications: Material: Steel, plastic
Application: Tower case with 7 expansion slots and a power shroud, Tower case with 8 expansion slots
Bearing: Hydraulic bearing
Rated Current: 12V
Speed: 1500 RPM
Dimension: 66 x 127 x 124mm
Weight: 300g
Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Specifications: Materials: ABS Plastic, Tempered Glass
Dimensions: 58 x 58 x 177mm / 2.29" x 2.29" x 6.97" (Incl. Protrusions)
Included Accessories:
ARGB GPU Support Bracket
ARGB 3-Pin
Manual
Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
Input Voltage: +5V
Current (Single strip): Max. 1.14A
Wattage (Single strip): Max. 5.7W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 38 LEDs (550mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 550 x 13 x 5.5mm (21.7 x 0.5 x 0.2in)
Scope of Delivery:
1 x 550mm (21.7in) PHANTEKS NEON Digital-RGB LED Strip
1 x 600mm (23.6in) M/B Digital-RGB adapter/Extension
3 x 90 degree mount
3 x 180 de...
Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm
Power Input:
Logic: 2.97V to 3.63V, 4.5V to 5.5V
Fan: 11.4V to 12.6V
RGB LED: 4.5V to 5.5V
Cable:
USB: 440mm
SATA Power: 465mm
Thermal sensor: 610mm
Fan extension: 300mm
RGB LED channels: Two 2-pin connector
Max. RGB LED strip per channel: 4
Max. RGB fan per channel:6 through 1 RGB LED hub
Specifications: LED: Blue LED Power Indicator
Material: Plastic
Power Connector Required: 1x SATA
Fans Ports: 10
Fan Connector Supported: 3-pin / 4-pin (3-pin not supported for PWM Function)
PWM Signal Input: 4-pin PWM Connector
Weight: 90g
Color: Black
Dimensions (L x W x H): 81 x 44 x 18 mm (3.2" x 1.75" x .70")
Specifications: Color: Black
Connectors: PWM 4pin connector x 1 to motherboard
SATA power cable x 1 to PSU
PWM 4pin header x 8, compatible with 3pin cable*
Length
PWM cable 500mm, SATA power cable 300mm
Capacitor size
2200µF
Dimension
54mm (W) x 19mm (H) x 40mm (D)
Specifications: Included Accessories: 1 x 300 mm Extension cable, 1 x 100 mm Extension cable
LED Strip Length: 300 mm, 10-LED
LED Strip Width: 10mm
LED Color: Color Changing RGB
Mounting: 3M Double sided tape & Magnets
Cable Finish: Black rubber
System Requirements: Requires HUE+ Advanced PC Lighting device to operate. Sold Separately
Specifications: Material: Plastic fan grille and 28 pcs RGB LED Strip
Pin definition: +12V, G, R, B
Application: 140mm fan grille, LED kit
Rated Voltage: 12V DC
Rated Current: 0.56 A
Net weight: 45.00g
Dimension: 140.00 x 140.00 x 6mm
Specifications: Material Plastic Shell
Signal input:
Standard addressable RGB 3Pin +5V, D, G*
Motherboard addressable RGB 4pin +5V, D, NP, G*
Signal output: SilverStone custom addressable RGB 3pin +5V, D, G** x 8
Power Input: SATA 15pin
Output limitation (each port): 5V 9A (4.5A+4.5A)***
Included Parts:
8 x Standard addressable RGB 3pin cable
1 x SATA power cable
1 x Input signal cable