Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm
Power Input:
Logic: 2.97V to 3.63V, 4.5V to 5.5V
Fan: 11.4V to 12.6V
RGB LED: 4.5V to 5.5V
Cable:
USB: 440mm
SATA Power: 465mm
Thermal sensor: 610mm
Fan extension: 300mm
RGB LED channels: Two 2-pin connector
Max. RGB LED strip per channel: 4
Max. RGB fan per channel:6 through 1 RGB LED hub
Specifications: Materials: ABS Plastic, Tempered Glass
Dimensions: 58 x 58 x 177mm / 2.29" x 2.29" x 6.97" (Incl. Protrusions)
Included Accessories:
ARGB GPU Support Bracket
ARGB 3-Pin
Manual
Specifications: Dimensions(L x W x H):
GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58"
305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58"
Riser cable: 165mm / 6.49"
Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.)
Supported GPU Type: Any length, up to3 slots wide
Riser Cable Model: Riser Cable PCIe 4.0 x16
Compatibility: PCIe 4.0 and older
Certifications: BKC210933AC
PCB / Wire UL Numbers: E1895721/E252840
Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG
Insulation Materials: PE, TPE
Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass
Connectors: PCIe x16 Male to PCIe x16 90° Female
Rated working voltage and current: DC 12V / 5A
Operating Temperature: -20° to ...
Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
M/B Adapter: Digital RGB adapter 3pin (+5V,Data,NA,GND)
Input Voltage: +5V
Current (Single strip): Max. 0.84A
Current (Dual Strip): Max. 1.68A
Wattage (Single strip): Max. 4.2W
Wattage (Dual Strip): Max. 8.4W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 28 LEDs (400mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 400 x 13 x 5.5mm (15.7 x 0.5 x 0.2in)
Scope of Delivery:
2 x 400mm (15.7in)...
Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Specifications: Dimensions: 2.91" x 0.59" x 2.52" (WxHxD)
Weight: 0.14 lbs.
Mounting: Magnet / Velcro
Control Method: NZXT CAM software
Connections:
Internal-USB Cable - x1
SATA Power Cable - x1
Fan Splitter Cables - 3x 1 to 3 split
Input Connector: 12V DC / 2.6A
Output Channel Voltage: 5V DC
Output Channels:
2 x RGB Lighting Channels
3 x Fan Channels
LED Color: RGB
LED Modes: Preset, Smart, Custom, Audio, Game
Included Accessories:
2 x Magnet
2 x 3M Velcro
Specifications: Dimension: 90mm x 53mm x 14mmWeight (g): 122Masterial: Plastic, PCBControl Method: Cooler Master SoftwareInput Connector: SATA PowerOutput Channel Voltage: 12vOutput Channels: 4 ports (Port 1, 2 for frequency control) Lighting Mode: Static , Breathing, Color Cycle, Stars,Customize , Multilayer, Turn off, Mirage(Frequency control) Included Accessories:4 x 450 mm Extension cable1 x 600 mm Extension cableInterface: USB connectors (9 Pin)
Specifications: Dimensions(L x W x H):
GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58"
305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58"
Riser cable: 165mm / 6.49"
Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.)
Supported GPU Type: Any length, up to3 slots wide
Riser Cable Model: Riser Cable PCIe 4.0 x16
Compatibility: PCIe 4.0 and older
Certifications: BKC210933AC
PCB / Wire UL Numbers: E1895721/E252840
Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG
Insulation Materials: PE, TPE
Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass
Connectors: PCIe x16 Male to PCIe x16 90° Female
Rated working voltage and current: DC 12V / 5A...
Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm Power Input: Logic: 2.97V to 3.63V, 4.5V to 5.5V Fan: 11.4V to 12.6V RGB LED: 4.5V to 5.5V Cable: USB: 440mm SATA Power: 465mm Thermal sensor: 610mm Fan extension: 300mm RGB LED channels: Two 2-pin connector Max. RGB LED strip per channel: 4 Max. RGB fan per channel:6 through 1 RGB LED hub