Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Dimensions: 2.91" x 0.59" x 2.52" (WxHxD)
Weight: 0.14 lbs.
Mounting: Magnet / Velcro
Control Method: NZXT CAM software
Connections:
Internal-USB Cable - x1
SATA Power Cable - x1
Fan Splitter Cables - 3x 1 to 3 split
Input Connector: 12V DC / 2.6A
Output Channel Voltage: 5V DC
Output Channels:
2 x RGB Lighting Channels
3 x Fan Channels
LED Color: RGB
LED Modes: Preset, Smart, Custom, Audio, Game
Included Accessories:
2 x Magnet
2 x 3M Velcro
Specifications: Type: 3 Strip RGB LED Control Pack
Form Factor: Slim Profile
Voltage: 12V
LED Strips: (3) RGB Magnetic LED Strip
Mounting: 6 Neodymium Magnets + 3M Adhesive
LED Lights/Strip: 12
Fans Channels: 5
LED Modes: Flash Mode (Blue > Green > Red > White > Orange > Yellow > Purple) and 256 Color Fade Mode
Buttons:
Customize Button (256 Color Mode)
Mode Button (Color Select/Flash)
Brightness Button (Adjust Brightness Levels / Power On/Off)
LED Strip Chaining Capable: Yes
Power Connector: (1) 4-pin Fan Header
Weight: 145g
Color: Black
Dimensions: 80 x 60 x 20 mm
Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Specifications: Color: Blue
Material: Plastic strip with 15 LED(3.6W) and adhesive tape
Operating system support: 12V
Connectors:
Peripheral to LED 4pin connector x 1
4pin daisy chain connector x 1
Length: 300mm
Weight: 22g
Specifications: Color: Red
Material: Plastic strip with 15 LED(3.6W) and adhesive tape
Operating system support: 12V
Connectors:
Peripheral to LED 4pin connector x 1
4pin daisy chain connector x 1
Length: 300mm
Weight: 22g
Specifications: Material: Plastic fan grille and 28 pcs RGB LED Strip
Pin definition: +12V, G, R, B
Application: 140mm fan grille, LED kit
Rated Voltage: 12V DC
Rated Current: 0.56 A
Net weight: 45.00g
Dimension: 140.00 x 140.00 x 6mm
Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
Input Voltage: +5V
Current (Single strip): Max. 1.14A
Wattage (Single strip): Max. 5.7W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 38 LEDs (550mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 550 x 13 x 5.5mm (21.7 x 0.5 x 0.2in)
Scope of Delivery:
1 x 550mm (21.7in) PHANTEKS NEON Digital-RGB LED Strip
1 x 600mm (23.6in) M/B Digital-RGB adapter/Extension
3 x 90 degree mount
3 x 180 de...
Specifications: Material: 18 pcs 5050 RGB LED with magnetic strip and adhesive tape
Pin definition: +12V, G, R, B
Included Parts:
RGB LED strip x 2
Y cable x 2
Length: 300mm
Wattage: 1.44W (12V, 0.12A)
Tandem limits: 5 pcs on each line
Weight: 30g
Specifications: Color: White
Material: Plastic strip with 15 LED(3.6W) and adhesive tape
Operating system support: 12V
Connectors:
Peripheral to LED 4pin connector x 1
4pin daisy chain connector x 1
Length: 300mm
Weight: 22g
Specifications: LED Type: 5050 Top SMD
LEDs: 12
LED length: 30cm
Lumens: 50-60 lm
Voltage: 12V
Wattage (W): 3.6W
Accessories: Power cable x 1 Extended cable x 1
Specifications: LED Type: 5050 Top SMD
LEDs: 12
LED length: 30cm
Lumens: 50-60 lm
Voltage: 12V
Wattage (W): 3.6W
Accessories: Power cable x 1 Extended cable x 1
Specifications: Material: Plastic outer shell
Included Parts:
2 x SST-LS02 RGB LED strip
2 x Extend Y cable
1 x RGB 4pin signal cable
1 x 4pin peripheral cable
Signal input: a RGB 4pin host (+12V, G, R, B) or built-in IC control
Signal output: 8 x SilverStone custom RGB 4pin
Net weight: 1.06 oz.
Dimension: 0.75" x 1.81" x 3.35"