Case Accessories

Limited time offer, ends 05/16

• Model #: FANHUB-5W

(2)

• Model #: P28ARGB-B

• Types: Front / Back Panel & Accessories
• Colors: White
• Model #: O11DERGB-4W

(112)

• Brand: COOLER MASTER
• Part Number: MCA-U000R-WFVK03
• Types: GPU Bracket
• Colors: White / Gray
• Model #: MCA-U000R-WFVK03

(7)

• Colors: Black
• Model #: A3-2X

(4)

• Model #: A3-3WD

(9)

• Model #: GB-002

• Types: Case Fan Accessories
• Colors: Black
• Specifications: Material: Steel, plastic Application: Tower case with 7 expansion slots and a power shroud, Tower case with 8 expansion slots Bearing: Hydraulic bearing Rated Current: 12V Speed: 1500 RPM Dimension: 66 x 127 x 124mm Weight: 300g
• Model #: FDP02B

Limited time offer, ends 04/30

• Types: Lighting & Decor
• Colors: White
• Length: 50cm
• Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
• Model #: ARGBSTR4MM-1M

(4)

• Type: ARGB Controller
• Package Contents: Adjust 2 RGB controller RGB Y-cable (2x male-to-female)
• Model #: FD-A-ADJ2-001

• Model #: 6908110127

(10)

• Model #: Q58-2W

(58)

• Types: Case Fan Accessories
• Colors: Black
• Length: N/A
• Specifications: If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.
• Model #: MFX-ZHHN-1NNN6-R1

• Types: Lighting & Decor
• Colors: Black
• Specifications: Dimension: 90mm x 53mm x 14mmWeight (g): 122Masterial: Plastic, PCBControl Method: Cooler Master SoftwareInput Connector: SATA PowerOutput Channel Voltage: 12vOutput Channels: 4 ports (Port 1, 2 for frequency control) Lighting Mode: Static , Breathing, Color Cycle, Stars,Customize , Multilayer, Turn off, Mirage(Frequency control) Included Accessories:4 x 450 mm Extension cable1 x 600 mm Extension cableInterface: USB connectors (9 Pin)
• Option: RGB Controller / Hub
• Model #: MFY-RCSN-NNUDK-R1

(112)

• Types: ARGB GPU Support Bracket
• Colors: Black
• Length: ARGB Cable length: 510mm / 20.1 inch
• Specifications: Materials: ABS Plastic, Tempered Glass Dimensions: 58 x 58 x 177mm / 2.29" x 2.29" x 6.97" (Incl. Protrusions) Included Accessories: ARGB GPU Support Bracket ARGB 3-Pin Manual
• Model #: MCA-U000R-GSBTG-00

• Model #: FANHUB-18BLA

• Types: Cable Accessories
• Colors: Black
• Specifications: Color: Black Connectors: PWM 4pin connector x 1 to motherboard SATA power cable x 1 to PSU PWM 4pin header x 8, compatible with 3pin cable* Length PWM cable 500mm, SATA power cable 300mm Capacitor size 2200µF Dimension 54mm (W) x 19mm (H) x 40mm (D)
• Model #: CPF04

(1)

• Model #: SC-T31B

• Colors: Non-addressable RGB
• Length: 230mm
• Parts: 3 Years
• Model #: ACCSJSBVC-3CLR

(180)

• Types: Screws & Mount
• Colors: Black
• Color: Black
• Model #: MCA-0005-KUH00

(3)

• Types: Bracket
• Colors: Black
• Model #: 603006040-GP

• Model #: VT-ST-ARGB-MT

(285)

• Types: Lighting & Decor
• Colors: Black
• Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm Power Input: Logic: 2.97V to 3.63V, 4.5V to 5.5V Fan: 11.4V to 12.6V RGB LED: 4.5V to 5.5V Cable: USB: 440mm SATA Power: 465mm Thermal sensor: 610mm Fan extension: 300mm RGB LED channels: Two 2-pin connector Max. RGB LED strip per channel: 4 Max. RGB fan per channel:6 through 1 RGB LED hub
• Parts: 30 DAYS WARRANTY
• Model #: CL-9011110-WW

• Part Number: 90DA00C0-B08000
• Types: Case Fan Accessories
• Colors: Black
• Model #: TUF GAMING ARGB PWM FAN HUB

(20)

• Types: Vertical Graphics Card Holder Kit
• Colors: Black
• Length: 165mm (6.49in)
• Specifications: Supported Graphics Cards: Any length, up to 2.5 slots wide Riser Cable Model: Riser Cable PCie 3.0 Ver.2 Compatibility: PCI-E 3.0 Certifications: EMI, IPC4101D/21 Electronic Component Materials: PCBA, Copper Wire 28 AWG, Copper Wire 30 AWG Insulation Materials: PE, TPE Other Materials: ABS, SPCC, SGCC Steel, Nickel, Gold, Brass Required PCI slots: 7 PCI slots are required for mounting Dimensions GFX Holder kit: 184 x 142 x 121mm / 7.25 x 5.59 x 4.77 inch (closed) 239 x 142 x 121mm/ 9.41 x 5.59 x 4.77 inch (fully open)
• Model #: MCA-U000R-KFVK01

(112)

• Types: GPU Bracket
• Colors: Black / Gray
• Specifications: Dimensions(L x W x H): GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58" 305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58" Riser cable: 165mm / 6.49" Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.) Supported GPU Type: Any length, up to3 slots wide Riser Cable Model: Riser Cable PCIe 4.0 x16 Compatibility: PCIe 4.0 and older Certifications: BKC210933AC PCB / Wire UL Numbers: E1895721/E252840 Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG Insulation Materials: PE, TPE Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass Connectors: PCIe x16 Male to PCIe x16 90° Female Rated working voltage and current: DC 12V / 5A Operating Temperature: -20° to ...
• Model #: MCA-U000R-KFVK03

(1)

• Model #: LAN207-1W

• Part Number: PH-VGPUKT4.0_03R
• Types: GPU Bracket
• Colors: White
• Specifications: Chassis with open PCI slot design, P300A/P360A/P400A
• Model #: PH-VGPUKT4.0_03R_WT

Limited time offer, ends 04/26

• Brand: Adiven
• Part Number: AD-LED-DD
• Types: Lighting & Decor
• Specifications: Strip Length:19in per strip Input Voltage:DC 5V Only support DC5V ,don't support DC12V Waterproof Grade:IP30 Double-sided adhesive Powered by 5V 3-pin RGB header on your computer motherboard Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
• Model #: AD-LED-DD

• Types: Screws & Mount
• Colors: Silver
• Length: 0 ft.
• Parts: 2 Year
• Model #: FANSCREW

• Model #: BEGIMKB-14

(19)

• Model #: Cooler Master ARGB GPU-HWC

• Types: RGB & Fan Controller
• Colors: Black
• Specifications: Dimensions: 2.91" x 0.59" x 2.52" (WxHxD) Weight: 0.14 lbs. Mounting: Magnet / Velcro Control Method: NZXT CAM software Connections: Internal-USB Cable - x1 SATA Power Cable - x1 Fan Splitter Cables - 3x 1 to 3 split Input Connector: 12V DC / 2.6A Output Channel Voltage: 5V DC Output Channels: 2 x RGB Lighting Channels 3 x Fan Channels LED Color: RGB LED Modes: Preset, Smart, Custom, Audio, Game Included Accessories: 2 x Magnet 2 x 3M Velcro
• Model #: AC-2RGBC-B1

• Model #: 1234567

(12)

• Model #: RB-001X

• Types: Lighting & Decor
• Colors: Black
• Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm Power Input: Logic: 2.97V to 3.63V, 4.5V to 5.5V Fan: 11.4V to 12.6V RGB LED: 4.5V to 5.5V Cable: USB: 440mm SATA Power: 465mm Thermal sensor: 610mm Fan extension: 300mm RGB LED channels: Two 2-pin connector Max. RGB LED strip per channel: 4 Max. RGB fan per channel:6 through 1 RGB LED hub
• Model #: CL-9011110-WW