- Free 30-day Returns
Meet Your Seller
Darkside 7.75" CONNECT G2 Dimmable Rigid LED Strip - Blue (DS-0624)
- Our newest version CONNECT G2 utilize the very latest Japanese made IC module that has half height (from previous IC) thus reducing our LED height by 33% from (3mm to 2mm). The beam of light will be 33% wider, light emitting surface 2.4 time bigger a
- DarkSide LEDs were designed from scratch by adapting luxury automotive LEDs to computer modding. Our LED features ultra-bright Japanese LED modules, custom design circuit board, and custom DarkSide Connect micro-connectors.
- The DarkSide Connect name comes from a modular power extension cable design; it allows you to select the best power cables for you. It also makes it easy to change to an other type of connectivity without replacing the entire LED product. DarkSide Co
- Reminder : DarkSide Modular CONNECT Power Cable Sold Seperately. You can select your own cable HERE based on your personal configuration.
- Safe Handling Notice: Do not bend and do not shorcut to avoid permanent damage.
Any questions? Ask CelesteSM will help you find out quickly.
The DarkSide 7.75" (20cm) CONNECT G2 Dimmable Rigid LED Strip lights your build in blue. G2 is the second generation of the DarkSide CONNECT rigid strips: it uses a lower LED module with a wider beam and more light at lower power draw than before. The strip ends in a short wire with a DarkSide CONNECT connector and is powered by the DarkSide CONNECT cable you choose (sold separately).
Properties
- Type: Rigid LED strip, dimmable, CONNECT G2
- Light color: Blue
- Length: 7.75" (20cm)
- LED count: 18
- Operating voltage: About 6V to 12V (dim to full brightness)
- Power consumption: 1.7W
- Power wire: 7cm, DarkSide CONNECT
- Connector: DarkSide CONNECT, female
- Mounting: Adhesive tape strips (included)
- Pieces in the pack: 1
Second generation LED modules
CONNECT G2 uses a Japanese-made LED module with half the height of the module used before, so the LED height drops by a third, from 3mm to 2mm. DarkSide says the beam of light is 33% wider and the light emitting surface 2.4 times bigger, so the strip is brighter, while the power draw is lower than before.
Rigid strip for clean lines
DarkSide designed its rigid LED strips for PC modding, based on LEDs made for luxury cars: ultra-bright Japanese LED modules on a custom DarkSide circuit board with DarkSide CONNECT micro-connectors. The rigid board gives a straight, even line of light along a case edge, a radiator, a reservoir or a panel, and the low profile fits into tight spots.
Modular power cable
The CONNECT design separates the light from its power cable. You choose a DarkSide CONNECT cable for your setup: to a 3-pin fan header, to a 4-pin Molex line of the power supply, Y-cables and 3-way cables for several lights, pass-through cables and extensions. Changing the power connection later means changing the cable, not the light, and the cables help to keep the cable clutter in your build down.
Dimmable
The strip lights from about 6V and reaches full brightness at 12V. On a voltage controlled fan header or fan controller you can dim it by lowering the voltage.
Technical data
- Model: DarkSide CONNECT G2 Dimmable Rigid LED Strip
- Light color: Blue
- Length: 7.75" (20cm)
- LED count: 18
- LED height: 2mm
- PCB: Custom 20cm, Rev2016
- Operating voltage: About 6V to 12V
- Power consumption: 1.7W
- Power wire: 7cm, DarkSide CONNECT
- Sleeving: DarkSide Jet Black HD
- Connector: DarkSide CONNECT, female
- Power cable: DarkSide CONNECT cable, sold separately
- Mounting: Adhesive tape strips
Notes
- The DarkSide CONNECT power cable is sold separately. Choose the cable type for your configuration.
- Do not bend the strip and do not short-circuit it: both can damage it permanently.
- DarkSide makes the CONNECT G2 strip in white, ice blue, blue, red and green, in 12" (30cm) and 7.75" (20cm). This listing is the 7.75" blue version; the same color is also available in 12" (30cm).
In the box
- 1x DarkSide 7.75" CONNECT G2 Dimmable Rigid LED Strip - Blue
- 1x Adhesive tape strips
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory





