ModMyMods 8mm ID x 11mm OD PVC Tubing - Clear (58000)

ModMyMods 8mm ID x 11mm OD PVC Tubing is clear soft tubing for small water cooling builds, also listed as 11/8mm. With a 8 mm inner diameter and a 11 mm outer diameter it is made for compact loops, embedded devices and single-board computers where standard PC tubing is too large. It is sold by the foot.

Properties

• Type: PVC tubing
• Size: 8mm ID x 11mm OD
• Metric size: 11/8mm
• Material: PVC
• Color: Clear
• Sold by: The foot

For small loops

This size fits 11/8mm compression fittings, such as the ModMyMods 11/8mm G1/4" Compression Fittings. In the ModMyMods Raspberry Pi Mini Water Cooling Kit it connects the pump top, radiator and divider blocks; slide the fitting collars over the tube before you seat it on the fittings.

Clear PVC

The clear wall lets you see the coolant and any air bubbles while you fill and bleed the loop. PVC tubing is soft and bends easily around tight corners.

Two small sizes

ModMyMods sells clear PVC tubing for small builds in 3mm ID x 5mm OD (5/3mm) and 8mm ID x 11mm OD (11/8mm). This listing is the 8mm ID x 11mm OD tube.

Technical data

• Type: PVC tubing
• Inner diameter (ID): 8 mm
• Outer diameter (OD): 11 mm
• Wall thickness: 1.5 mm
• Metric size: 11/8mm
• Material: PVC
• Color: Clear
• Sold by: The foot (quantity 1 = 1 foot)

Notes

• Cut the tube square with a sharp blade so it seats evenly on the barb or fitting.

In the box

• 1x ModMyMods 8mm ID x 11mm OD PVC Tubing - Clear (1 foot per quantity)