SuperSeal 30 High-Gloss Concrete Sealer 5-Gallon Solvent-Based Styrene Acrylic for Brick Pavers, Stamped Concrete & Decorative Surfaces

HIGH-GLOSS FINISH THAT ENHANCES SURFACE COLOR The 30% high-solids styrene acrylic formula enriches the natural color of concrete, brick pavers, stamped concrete, and exposed aggregate with a wet-look high-gloss sheen. Not advised for clay pavers or plain poured concrete. BREATHABLE FORMULA AIDS IN PREVENTING WHITENING Permits moisture vapor to escape through the dried film, lowering the risk of milky white haze or discoloration on sealed surfaces. HELPS STABILIZE JOINT SAND BETWEEN PAVERS Penetrates into paver joints to help bind and stabilize sand, reducing washout and weed intrusion over time. COVERAGE Concrete Pavers: 100 sq. ft. per gallon. Decorative/Stamped Concrete: 200 sq. ft. per gallon. Coverage will vary based on surface porosity and application method. Apply with a solvent-resistant sprayer or a 1/2 inch roller cover. One coat is recommended. Foot traffic: 4 hours; vehicle traffic: 48 hours. MEETS ASTM C-309 AND ASTM C-1315 STANDARDS Suitable for stamped concrete, decorative cement, acid-stained surfaces, brick pavers, and exposed aggregate. Clean tools with A-1 Solvent or Xylene