Stealkey Customs CubeTube Distroplate 240mm - Acryl, Clear (SW10134)

The Stealkey CubeTube Distroplate 240mm is a slim acrylic distro plate in the shape of a square hard tube. It is 240 mm long, only 31 mm wide and 18 mm deep, and its two internal channels and 9x G1/4" ports connect a CPU block, a GPU block (horizontal or vertical) and up to two radiators with straight tube runs.

Properties

• Type: Slim distro plate, hard tube look
• Size: 240 x 31 x 18 mm
• Channels: 2
• Ports: 9x G1/4"
• Connects: CPU, GPU and up to two radiators
• Color: Transparent
• Material: Acrylic

The CubeTube idea as a distro plate

Stealkey bases this plate on its CubeTube reservoir, which it first developed as a collaboration project with LiquidHaus. The CubeTube Distroplate combines the look of a hard tube with the function of a distro plate, so the loop looks tidy while the plate does the routing.

2 channels, 9 ports

The two integrated channels feed a CPU block, a GPU block in horizontal or vertical position and up to two radiators. The 9x G1/4" ports are placed so the tubes can run in straight lines. Close the ports you do not use with the 3 included plugs.

Flexible mounting

At only 31 mm wide the plate fits beside or in front of a radiator and fan combination. The back has threads on the 105 mm fan hole pattern, so it screws straight onto a fan bracket with the included M3 x 6 mm screws and washers. Stealkey also sells mounting brackets (SK-UNI mounting bracket 28 mm or 60 mm, and the FLEX mounting bracket 28 mm) that hold the plate in front of fans or a radiator, and that also let a tube reservoir sit on the same radiator; Stealkey says the airflow is barely affected. Stealkey gives a tightening torque of 0.8 to 1.5 Nm for the M3 screws.

Coolant and care

Stealkey asks for a coolant that is compatible with acrylic, because an unsuitable coolant can damage the acrylic parts; Stealkey keeps a coolant compatibility list on its website. Clean the acrylic only with a microfiber cloth and never with alcohol-based cleaners or solvents, which cause stress cracks. Stealkey recommends rinsing the part before installation to remove any last machining residues.

Technical data

• Model: Stealkey CubeTube Distroplate 240mm (SW10134)
• Type: Distro plate
• Dimensions (L x W x D): 240 x 31 x 18 mm
• Channels: 2
• Ports: 9x G1/4"
• Connects: CPU block, GPU block, up to 2 radiators
• Mounting: 105 mm fan hole pattern, M3 x 6 mm screws
• Material: Acrylic
• Color: Transparent
• Made in: Germany, CNC-milled and hand-assembled

Notes

• The mounting brackets and the reservoir are sold separately.
• Stealkey also makes the CubeTube Distroplate in a 360 mm length.
• Screw fittings into the acrylic hand-tight only and do not use a wrench; an overtightened fitting can crack the acrylic and leak.
• Leak-test the loop before you power the rest of the system; Stealkey says to test with no more than 0.5 bar.

In the box

• 1x Stealkey CubeTube Distroplate 240mm - Acrylic
• 4x M3 x 6 mm mounting screws
• 4x Washers
• 3x G1/4 plugs