Godiag GT100+ OBDII Breakout Box, Advanced OBD and CAN Protocol Detector for ECU Bench Testing and Car Diagnostics

ECU Bench Tool GT100+ allows you to power an ECU on the bench; you can easily do diagnostics, vehicle immobilizer, and security work, whether it is on the bench with the included power adapter, or in the vehicle with the OBDII port supplied power.
Added CAN BUS and K-LINE ProtocolGT100+ not only check all obd2 diagnostic socket pins, but also non-standard OBD2 protocols, like the port 1, 9, 3, 11, 12, 13, and 8. It can test CAN BUS and K-LINE protocol.
Help You Verify Communication, Power, GroundsBefore connecting to your costly scan tools, you can use GT100+ to verify the networks are communicating properly, or there is proper power and grounds being supplier to the box assembly. In the case you do not have a proper power or ground, it might burn your expensive scan tools.
Easy Operation With Banana Plug & Current DisplayCompared with similar tools, GT100+ OBDII Breakout box features with simple operation and additional features for doing ECM, ECU repair on vehicles. GT100+ breakout box connects with ECU module via banana plug or DB25 connector, not only providing power to ECU, but also directly displaying electronic current value. You can easily judge whether your cable has connected correctly or the ECU module is in good condition.
Power ECU when Replacing Battery The auxiliary power supply aims at supplying power to the vehicle through GT100+ OBDII Breakout Box before replacing the battery to sustain the power supply to the vehicle.