12 Pcs 7mm X 100mm Hot Glue Sticks Auto Body Paintless Dent Removal Repair Black for Car

Specifications:

• Stick size: KEY_TAB 7mm x 100mm /0.28" x 3.94"(Diameter*Length)
• Softening Point: 100°C
• Total Length100mm/3.94"

Description:

• Advanced, practical ,stability and strong viscosity design of this glue adhesive stick.
• This practical glue stick use in high temperature glue gun(not included).
• Great for car paintless dent repair and more.
• Non-toxic of this adhesive craft sticks. Widely used hot-belt adhesives in the world of high viscosity and drip-dryness.

How to Use?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Package Included:

• 12 x Black Hot Melt Glue Sticks