Dual Showerhead Combo
Merchant VideoThe swivel ball joint is tight, causing difficulty in adjusting the angle.
The swivel ball joint needs to be installed onto the shower arm first before the angle can be easily adjusted due to leverage. Adjusting the head out of the box by hand does not reflect its swivel capability after installation.
Is there a leak at the connection point?
Check if the filtered rubber washer inside the connector is placed and flattened properly, avoid overtightening the connector or the gasket may get squeezed. Use some Teflon tape (3-5 circles) as an auxiliary measure to prevent leakage.
Is there a leak coming from the massage shower head?
The leakage may be caused by a loose cap on the filter replacement part. Please tighten the cap on the left side to the maximum extent and wait for a few minutes to see if the leakage continues to exist.
Doesn't fit?
Our shower head is designed to be compatible with the widely used standard G1/2 interface. However, please note that if your home has a different interface and not the G1/2, the shower head will not be compatible.
How to replace the filter cartridge, and where to buy the filter cartridge?
To replace the filter cartridge, unscrew the showerhead. You can find replacement cartridges on by searching for the keywords: MakeFit shower filter replacement.
MakeFit Shower Solutions

Dual Showerhead Combo
Merchant VideoThe swivel ball joint is tight, causing difficulty in adjusting the angle.
The swivel ball joint needs to be installed onto the shower arm first before the angle can be easily adjusted due to leverage. Adjusting the head out of the box by hand does not reflect its swivel capability after installation.
Is there a leak at the connection point?
Check if the filtered rubber washer inside the connector is placed and flattened properly, avoid overtightening the connector or the gasket may get squeezed. Use some Teflon tape (3-5 circles) as an auxiliary measure to prevent leakage.
Is there a leak coming from the massage shower head?
The leakage may be caused by a loose cap on the filter replacement part. Please tighten the cap on the left side to the maximum extent and wait for a few minutes to see if the leakage continues to exist.
Doesn't fit?
Our shower head is designed to be compatible with the widely used standard G1/2 interface. However, please note that if your home has a different interface and not the G1/2, the shower head will not be compatible.
How to replace the filter cartridge, and where to buy the filter cartridge?
To replace the filter cartridge, unscrew the showerhead. You can find replacement cartridges on by searching for the keywords: MakeFit shower filter replacement.
MakeFit Shower Solutions
![]() Shower Filter Replacement | ![]() Rain Shower Head Combo | ![]() Shower Head Combo | ![]() Filtered Rain Shower Head | ![]() Filtered Handheld Shower | ![]() Filtered Handheld Shower | ![]() All Metal Shower Head |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Water Filtering | ||||||
| YES | NO | NO | YES | YES | YES | NO |
| Features | ||||||
| Shower Filter Replacement | Easy Reach 3-way Diverter | Easy Reach 3-way Diverter | Shower Head with Filter | Filter + Power Wash | Filter + One-hand Adjustment | Waterfall Experience |
| Settings | ||||||
| Premium ABS | 3 Spray+3 Settings | 3 Spray+3 Settings | 7 Settings | 10 Settings | 6 Settings | Waterfall & Rainfall |
| Compatibility | ||||||
| Filter For Shower Head SSJ731 | Standard G1/2 Connection | Standard G1/2 Connection | Standard G1/2 Connection | Standard G1/2 Connection | Standard G1/2 Connection | Standard G1/2 Connection |
| Model Number | ||||||
| SSJ731-Filter | SB25913150 | SB25913150 | H5H117 | SSJ781 | S6526 | ?L1001 |







































































