Components & Storage

• Type: CPU Block
• Model #: 6932167227195

• Type: Case Fan
• Dimensions: 80×40×18mm
• Model #: 4010GPU2PACK

(74)

• Type: Liquid Cooling System
• Block Compatibility: Intel: LGA 1700 / 1200 / 1151 / 1150 / 1155 / 1156 /2066 / 2011-3 / 2011 AMD: AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 /FM2+ / FM2 / FM1 / Socket TR4 / sTRX4 / SP3
• Radiator Size: 397.5 x 119.2 x 27 mm
• Fan Size: 3 Fan Slots (120 mm)
• Model #: GA2T36INW

• CPU Type: intel i9-12900F
• Model #: MV300 i9-rtx3060-64+1

• Type: Fittings
• Model #: BP-DG14AALPII

• Type: Fittings
• Model #: BP-DG14AALPI

• Fan Size: 120mm
• Bearing Type: Hydraumatic Bearing
• Series: Air Cooler Series
• Type: Fan & Heatsinks
• Model #: CPU-12ARGB-6

• Type: CPU Block
• Model #: 6932167220592

(59)

• Brand: Lian li
• Fan Size: 120mm
• LED: ARGB
• Type: Case Fan
• Model #: UF-SLIN120-3B

(44)

• Brand: Lian li
• Fan Size: 120mm
• LED: ARGB
• Type: Case Fan
• Model #: UF-SLIN120-3W

• Model #: VC-16BLA

• Type: CPU Block
• Model #: 6970685783014

• Model #: N-EV3090TIFTW3-X

• Type: CPU Block
• Model #: N-IG3090TINOC-X

(2)

Special price, limited time offer~

• Motherboard Compatibility: Micro-ATX/ Mini-ITX
• Front Ports: USB 3.0 / USB 3.1 Type-C / Audio
• Brand: Bitspower
• Series: Titan One Mini 2.0
• Model #: BPTA-O11D-MINI_CPU_A2.0-SW

• CPU Type: Intel Pentium 4 / Celeron
• Model #: HT-Mini-Pc000362

• Type: Accessories
• Model #: 3831109818664

• Model #: HEL-00018-N1-GP

• Model #: 71745--_6QkJwmm

• Bearing Type: Fluid Circulative Bearing
• Air Flow: 25-30 CFM
• Noise Level: 10 - 15 dBA
• Model #: 807-MBxVK5Ftm

• Model #: 000000006

• Model #: RC300

Limited time offer, ends 01/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

Limited time offer, ends 01/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Model #: N-ICH3070-X

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

• Over Voltage Protection: Yes
• Overload Protection: Yes
• Input Voltage: 110 - 120 V / 220 - 240 V
• Connectors: 1 x 24 pin (20+4) ATX
• Model #: GD-KRATOS P1A-750G

• Type: CPU Block
• Model #: RT14M-TOOL