Features: AM4 CPU heat sink bracket.For am4 motherboard and clip-on cooler . The pin has a small hole corresponding to the main board, which is firm and practical.90x54mm mounting hole distance with 4 screws. AMD CPU Fan Bracket Base for AM4(Motherboard chipset B350 X370 A320 X470). For hook-type air-cooled or partially water-cooled radiators (B1220/B240).
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...