Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency:
1000 Hz nominal
Alternating Frequency:
1000/1500 Hz nominal
Over Voltage Protection:
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode:
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode:
8 Vdc with fresh battery
Battery:
9V alkaline
Temperature:
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
Memory Standard: DDR4:5333(OC)/5133(OC)/5066(OC)/ 5000(OC)/4800(OC)/4700(OC)/4600(OC)/4500(OC)/4400(OC)/4266(OC)/4133Non-ECC, Un-buffered Memory*
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
OptiMem II
* Supported memory types, data rate(Speed), and number of DRAM modules vary depending on the CPU and memory configuration, for more information refer to www.asus.com for memory support list.
Number of Memory Slots: 4x288pin (DDR4)
Audio Chipset: Realtek S1220A 7.1 Surround Sound High Definition Audio CODEC*
- Impedance sense for front and rear headphone outputs
- Internal audio Amplifier to enhance the highest quality sound for headphone and speakers
- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking
- High quality 120 dB SNR stereo playback output and 113 dB SNR recording input (Line-in)
- Supports...
Compatibility: Works With: PCs, Macs, and Android Devices
Software Compatibility: Windows (10/8.1/7), Mac OS X 10.8 or later, Android (5.1/5.0)
Ports Spec: 2 x HDMI Ports
2 x DisplayPort Ports
1 x USB-C Port (USB 3.0 data only), 4 x USB 3.0 SuperSpeed Ports (1 powered for fast device charging)
1 x Audio In/Out Port