Components & Storage

• Type: CPU Block
• Model #: A-AR9070XTTC-X

• Type: CPU Block
• Model #: N-ICH5090DX3-X

• Type: CPU Block
• Model #: N-GV5080GMOC-X-V2

• Type: Liquid Cooling System
• Fan Size: No Fans
• Model #: A-XF6900XT-X_RBW

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 07/31

• Model #: 11-001-235

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Motherboard Compatibility: Mini-ITX, Micro-ATX, ATX, BTF & Project Zero
• Front Ports: 2 x USB-A 3.2 Gen 1; USB-C 3.2 Gen 2x2; Audio/Mic Jack; Power Button
• 120mm Fans: 1
• Power Supply Mounted: Bottom
• Model #: C-F500F-FM1E-G0K

(1)

• Type: VGA Block & Cooler
• Model #: BP-VGAB14AC-CL

• Model #: N-RTX3070FE-X

• Type: CPU Block
• Model #: N-GV4080EOC-X

• Type: CPU Block
• Model #: GBN-AS4090TUFOG

• Model #: Y7000P-2018

• Type: CPU Block
• Model #: N-AS3090TURBO-X-NE

(2)

• Type: VGA Block & Cooler
• Model #: BP-VG5700XTRD

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: VGA Chipsets
• Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
• Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
• Model #: 11-001-128

• 120mm Fans: 4Pcs 120mm Addressable RGB Fans
• Brand: VETROO
• Color: White
• Type: E-ATX Full Tower Case
• Model #: VT-CASE-AL800-WT + ARGB-WT X3

Limited time offer, ends 07/31

• Brand: EN-Labs
• Model: TX3CO6S
• Type: Internal Power Adapter
• Model #: TX3CO6S

Limited time offer, ends 07/31

• Model #: 11-001-064

• Model #: A-SP9070XTMT-X

• Type: Liquid Cooling System
• Model #: N-AS3070TITUF-X_RBW

• Model #: BECougarblazerS-W

• Model #: MX600 Mini RGB White

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

• Type: CPU Block
• Model #: N-GV3090TIGMOC-X

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.4mm
• Dimensions: 15mm x 15mm x 0.4mm
• Model #: 11-001-267

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
• Dimensions: 20mm x 20mm x 0.5mm
• Model #: 11-001-270

• Type: CPU Block
• Model #: N-GV4090WF-X-V2

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.2mm
• Dimensions: 20mm x 20mm x 1.2mm
• Model #: 11-001-273

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
• Dimensions: 20mm x 20mm x 0.8mm
• Model #: 11-001-271

• Model #: Case-012

• Motherboard Compatibility: Micro ATX / ATX / ITX
• Power Supply Mounted: Bottom
• Brand: YEYIAN
• Color: Black
• Model #: YCF-EPMIR-X1

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
• Dimensions: 15x15mm
• Model #: CU-PAD-KIT

• Type: CPU Block
• Model #: N-AS5080PM-X

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
• Dimensions: 28 x 28 x 20mm
• Model #: 11-001-327