Components & Storage

• Motherboard Compatibility: ATX / Micro ATX / Mini ITX
• Front Ports: USB 3.0 x2, Audio, Microphone
• 120mm Fans: Front: 120 mm x3 ARGB Led Fan Rear: 120 mm ARGB Led Fan
• Brand: FSP
• Model #: CMT510 Plus

• Type: Liquid Cooling System
• Block Dim.: 89 x 91 x 101 mm
• Block Material: Copper
• Radiator Size: 399.5 x 120 x 30 mm
• Model #: ASUS ROG RYUJIN III 360

Limited time offer, ends 07/30

• Model #: C24W-X4363

• Type: CPU Block
• Model #: 6932167210012

• Type: CPU Water Cooling
• LED: Addressable RGB
• Model #: GD-CHIONE M4-360

• Type: CPU Block
• Model #: 6932167210807

(127)

• Memory Standard: DDR4 4200(O.C.)/ 4133(O.C.)/ 4000(O.C.)/ 3600(O.C.)/ 2666/ 2400/ 2133 * Hyper DIMM support is subject to the physical characteristics of individual CPUs. * Actual memory frequency differs from Intel CPU types and memory module. Please check Intel official site for more detail about the memory types supported by each CPU.
• Number of Memory Slots: Intel Core X-series Processors (6-core above): 8 x DIMM Intel Core X-series Processors (4-core): 4 x DIMM
• Audio Chipset: Realtek ALC S1220A High Definition Audio CODEC
• Brand: ASUS
• Model #: WS X299 SAGE

• Model #: 552614544963

• Model #: 501703339977

• Model #: JONSPLUS i100 Pro

Limited time offer, ends 07/31

• Brand: EN-Labs
• Model #: 36WPCICON5D

• Type: CPU Block
• Model #: RMSX14CK-SW

• Type: CPU Block
• Color: Frosted
• Model #: RT14MA-430-F

• Type: Case Fan
• Model #: tt-1225

• Model #: ROG RYUO IV 360 ARGB White

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Model #: RTP14M-630

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

• Motherboard Compatibility: Mini-ITX, Micro-ATX, ATX, BTF & Project Zero
• Front Ports: 2 x USB-A 3.2 Gen 1; USB-C 3.2 Gen 2x2; Audio/Mic Jack; Power Button
• 120mm Fans: 1
• Power Supply Mounted: Bottom
• Model #: C-F500F-FM1E-G0W

• Model #: 9158154835663

• Model #: XB0CKXCP1LW

• Type: CPU Block
• Color: Yellow
• Model #: PFLEXA10-34-PUY

• Fan Size: 120mm
• Series: N/A
• Type: CPU Water Cooling
• RPM: 800-2150 RPM±10%
• Model #: GL360-RGB Black

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 07/31

• Model #: 11-001-235

• Motherboard Compatibility: ATX / Micro ATX / Mini ITX
• Front Ports: USB3.0 × 2, USB2.0 × 2, Audio × 1, MIC × 1
• Power Supply Mounted: Bottom
• Type: ATX / Micro ATX / ITX
• Model #: Case-002-Kobe

(1)

• Model #: 6XY-06XYTBKD8

Limited time offer, ends 07/31

• Type: Fan splitter cable
• Length: 6 inches
• Connector Number: 3
• Model #: 121014

• Type: CPU Block
• Model #: F-RSX12-UR-6

• Motherboard Compatibility: ATX / E-ATX / Micro ATX / Mini ITX
• Front Ports: USB 3.0×2/AUDIO×1/MIC×1
• Power Supply Mounted: Bottom
• Brand: Jonsbo
• Model #: MOD3-Gray

• Type: CPU Block
• Model #: FCMMRM

• Type: CPU Block
• Model #: F-RSX12-TC-12

• Type: CPU Block
• Model #: F-RSX12-SW

• Model #: Y7000P-2018

• Type: CPU Block
• Model #: FA45-SW

• Type: CPU Block
• Color: White
• Model #: 6973826689930