Computer Accessories

Limited time offer, ends 05/18

• Model #: NV2SF-MD

Limited time offer, ends 05/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 05/30

• Features: This fan speed controller can control the speed manually and automatically prevent computer hardware from damage by overheating. It can slow down the speed when temperature is too high and fan is abnormal, it also can adjust the fan speed trough manually setting to regulate the computer temperature. Support up to 5 independent fans, with each channel delivering up to 10W to push even the most demanding fans available for builders,total 50W. Monitor the computer temperature intelligently by probes and adjust all fans automatically to a effective mode when turned in to auto mode. Individual fan speed can be adjusted in manual mode. Provide an audible alert when the temperature higher than the preset temperature to protect your PC from the damage caused by overheat. Apply touchscreen LCD with liquid crystal display mode Features temperature Monitor, RPM Display, 5 w...
• Model #: 580573102115

Limited time offer, ends 05/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

Limited time offer, ends 05/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Model #: TUF GAMING LC III 360 ARGB WHT

• Model #: N-RTX3070FE-X

• Type: Consumer Electronics
• Color: White
• Specifications: Product Type:Network Connector Connector Details:RJ-45 Female Network
• Parts: Lifetime
• Model #: N238-025-WH

• Part Number: 9EL
• Volume / Net Weight: 2.0g
• Thermal Conductivity: 13.5 W/mK
• Long Term Operating Temperature: -50 to 250 C
• Model #: Newegg054

• Part Number: 6941788876927
• Color: Gray
• Standards: USB 3.0 HUB
• Features: Indicator Light, Play, Plug
• Model #: Yottamaster-PH4U-U3-015-GY

• Type: CPU Block
• Model #: N-GV4080EOC-X

• Type: CPU Block
• Model #: GBN-AS4090TUFOG

• Brand: darkFlash
• Type: Liquid Cooling System
• Block Compatibility - AMD: AM5/AM4
• Block Compatibility - Intel: LGA 115x /1200 /1851 /2011 /1700
• Model #: DF-UV360-BK

• Brand: Jungle Leopard
• Fan Size: 3 Fan Slots (120 mm)
• Bearing Type: Hydraulic Bearing
• Fan RPM: 2000RPM
• Model #: JL PF 360 WH

• Type: CPU Block
• Model #: N-ML5090GR-SR-V2

• Type: CPU Block
• Model #: N-AS5080ASTRAL-X

• Model #: JL CA 360 BK

• Type: CPU Block
• Model #: RGV-LAN-O11XL-P-K

• Type: Case Fan
• Color: White
• Model #: DC12RGBW-LJ

• Color: White
• SLI Bridge: N/A
• Option: ARGB
• Model #: GH2 White

• Brand: Yottamaster
• Series: FS2U3
• Size: 2.5" & 3.5"
• Color: Gray
• Model #: Yottamaster-FS2U4-US-GY

Limited time offer, ends 05/18

• Model #: 4P-NVTPCE50HN

• Colors: Black
• Model #: MOUNT-PC06R

Limited time offer, ends 05/18

• Model #: 4P-NVTPCE50X

• Type: CPU Block
• Model #: CPU-XPR-POM-M-V2-NE

• Type: Case Fan
• Dimensions: 80×40×18mm
• Model #: 4010GPU2PACK

• Volume / Net Weight: 50g
• Thermal Conductivity: 10.5W/mK
• Long Term Operating Temperature: -50 to 250 C
• Specifications: GEL canned thermal paste can be purchased at an extremely low price with a net content of 50g and a thermal conductivity coefficient of 10.5W/mK, which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards.
• Model #: Newegg005

• Model #: 90RC01L2-B0CAY0

• Type: CPU Block
• Model #: F-RM1690-SW

• Type: CPU Block
• Model #: 6973826680920

• Model #: B1014

Limited time offer, ends 05/18

• Model #: QUA-NVTPCE8X

• Type: CPU Block
• Model #: CR-RD480RC-TN-V2-NE

• Part Number: USB Hub
• Model #: Yottamaster-PGPW3AT-U3-015-BK-EP

• Type: CPU Block
• Model #: A-RX7900XT-X

• Model #: SS800DXN