Computer Accessories

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

(177)

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: 450 - 1200 +/- 10% RPM
• Air Flow: 23.07 - 68.11 CFM
• Model #: CO-9050111-WW

Limited time offer, ends 07/31

• Model #: EN2433TU

• Model #: MOD-0384

• Type: THETA 31
• Bearing Type: Hydro Wave
• Air Flow: 10-15 CFM
• Noise Level: 20 - 25 dBA
• Model #: 50557-6w-432Eev

• Type: Case Fan
• Bearing Type: Fluid Circulative Bearing(FDB)
• RPM: 800~1900 RPM
• Air Flow: 55-60 CFM
• Model #: Lian Li-UNI-SL120-6Pack

• Model #: PINKFLOW240 ID

(10)

• Brand: Intel
• Fan Size: 92mm
• Type: Fan & Heatsinks
• LED: Blue
• Model #: LGA1200-COOLER

(24)

• Part Number: CL-W234-PL12SW-B
• Type: Liquid Cooling System
• Block Compatibility: LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Compatibility - Intel: LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150
• Model #: CL-W234-PL12SW-B

• Type: Fan only
• Model #: RNAB09RDNWXKX

(26)

• Brand: Thermaltake
• Fan Size: 120mm
• Type: Fan & Heatsinks
• RPM: 1000-2000RPM
• Model #: CLP0607

• Brand: Noctua
• Fan Size: 120mm
• Bearing Type: SSO2
• Type: Fan & Heatsinks
• Model #: NH-U12S-CH-BK

• Brand: COUGAR
• Fan Size: 120mm
• Bearing Type: Hydraulic Bearing
• Series: FORZA
• Model #: FORZA 85 ESSENTIAL

Limited time offer, ends 07/31

• Model #: 11-001-330

Limited time offer, ends 07/31

• Model #: 11-001-289

• Model #: UF-SL120V2-1B

• Brand: Unique Bargains
• Type: CPU Cooling
• Model #: a17041100ux1288

• Model #: 649823636845

(7)

• Type: CPU Block
• Block Compatibility: Intel LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 / 775 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Dim.: 93.4 L x 93.4 W x 52.2 H mm
• Block Material: Copper + PPS
• Model #: CL-W299-PL00SW-A

(4)

• Material: Aluminum
• Type: Enclosure
• HDD Count Supported: Single SSD
• Number of Bay: 1
• Model #: M2PJ-C3-SV

• Fan Size: 120mm
• LED: Addressable RGB
• Type: Case Fan
• RPM: <1600 RPM
• Model #: ZM-IF120 WH

• Dimensions: 73 × 24.4 × 9.6 mm
• Weight: 60 g
• Model #: Jonsbo M.2 2280 Heatsink

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

Limited time offer, ends 07/31

• Model #: 11-001-345

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

Limited time offer, ends 07/31

• Model #: 11-001-346

(10)

• Material: Aluminum
• Type: Enclosure
• HDD Count Supported: Single SSD
• Number of Bay: 1 Bay
• Model #: M2PJ-C3-GY-BP

• Model #: a21032600ux0282

Limited time offer, ends 07/31

• Model #: 11-001-235

(1)

• Color: Black Sparkle
• Model #: BP-HDM2HSAV-BS

• Brand: Unique Bargains
• Model #: s17101000wm1007

• Model #: a19122800ux0675

• Brand: Dynatron
• Type: Fan
• RPM: 12000 rpm
• Noise Level: 21.3 decibels
• Model #: Q11