Computer Accessories

• Model #: AJ-SER-0002691

• Model #: TD8020LS

• Model #: 584825452911

• Model #: AJ-SER-0001034

• Model #: 6402411568614ASDFA17386207

• Model #: 6402411567891ASDFA15125303

Limited time offer, ends 09/30

• Model #: 9480402503056

Limited time offer, ends 10/07

• Model #: Kepler-C72J-0382

• Model #: 6402411566825ASDFA12434227

• Model #: 694782993867

• Model #: 537470339557

• Model #: 9435761160396

• Model #: 477915997730

• Model #: 6402411565644ASDFA9453035

• Model #: 6402411569987ASDFA24028863

• Model #: 880395159381

• Model #: 677658629695

• Model #: 6402411566627ASDFA11743951

(3)

• Brand: Jonsbo
• Fan Size: 92mm
• Bearing Type: Hydraumatic Bearing
• Type: Fan & Heatsinks
• Model #: CR1400 EVO ARGB BLACK

• Model #: RDL9025S

• Model #: TX8025L12S

• Model #: 617327110727

Limited time offer, ends 10/07

• Model #: OYSC5KU-8.7-0294

• Model #: C75J*OYJ*G1*0820-34

Limited time offer, ends 10/07

• Model #: C72J-Y-1978-2IN1

• Model #: 9435761162390

• Type: CPU Block
• Model #: CPU-RAY-ON-M-NE

Limited time offer, ends 09/27

• Model #: C745-LUOYIMAN-Lsy817-2410

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

• Model #: 931663520027

• Type: Reservoir
• Model #: BPPRE-WTCR200

• Model #: 355756715136

• Type: CPU Block
• Model #: CPU-RAY-MC-M

Limited time offer, ends 09/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: 477915969850

• Model #: AJ-SER-0001062