Computer Accessories

• Model #: 301877963611

• Type: Tool Set
• Brand: iFixit
• Model #: IF145-299-4

• Type: Tool Set
• Features: 112 Bit Driver Kit
• Brand: iFixit
• Part Number: IF145-392-1
• Model #: IF145-392-1

• Type: Tool Set
• Features: 4 mm Bit Driver with Integrated SIM Eject Tool, 16 Precision Screwdriver Bits (4mm), Angled Precision Tweezers, Spudger, Jimmy, IFixit Opening Tool, IFixit Opening picks (set of 6) and Suction Handle.
• Brand: iFixit
• Part Number: IF145-348-5
• Model #: IF145-348-5

• Model #: 264505661788

• Model #: 477915998515

• Model #: 166185678868

• Model #: 679121238519

• Model #: 699917887080

Limited time offer, ends 03/01

• Type: Expansion Cards
• Model #: NV2SF-L15

• Model #: 587132122270

• Model #: 9158154943139

• Model #: 698617702488

• Brand: 52Pi
• Part Number: DP-0073
• Type: Side Panel
• Rack Units: 1U
• Model #: 427105856191

• Model #: FB07DM1MGG8

• Length: 7
• Model #: MOUNT-PC05C

• Model #: 694782042367

• Model #: 694782060828

• Model #: 604721825616

• Model #: 699917875162

• Model #: 8RA46AA

Limited time offer, ends 02/24

• Model #: C2ZP-H-122372

• Model #: 9359014194993

Limited time offer, ends 02/28

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: TB07FDYXPT7

• Model #: 118107720070

Limited time offer, ends 02/28

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• GPU/VGA Type: Intel UHD Graphics 620
• Form Factor: All-in-One
• Color: Gray
• CPU Type: Intel Core i5 8th Gen
• Model #: A19-I5 8260U-N-16G256G

• Model #: 98548251

• Model #: TB08Z1HG8N9

• Model #: 356571554726

• Model #: 472744082909

• Model #: CLAWB07LG831MP

• Model #: 477915987762

• Model #: 478643917243

• Model #: 99T55AA