Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating.
These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.
Installation Instructions:
-Make sure the chip modules are free from dirt and gre...
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
Just peel and stick.
Reduce the risk of hardware failure due to overheating.
Installation Instructions:
Make sure the chip modules are free from dirt and grease.
Peel the protective liner off on the base of the heatsink.
Apply the heatsinks to the corresponding chip modules and apply firm pressure.
Package Includes:
1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset
1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
Dimensions: 1x 14mmx14mmx7.5mm CPU chipset
1x 8.8mmx8.8mmx5mm LAN chipset
Specifications: SilverStone’s CA03 is a high quality M.2 SSD screw kit for computer professionals and enthusiasts. It includes two sets of precision machined standoffs / nuts of different heights, screws, washers, and matching screw driver.
Content:
M.2 hexagonal screw nut (thin), size: M2 x 3 + 2.5mm - 5pcs.
M.2 hexagonal screw nut (thick), size: M2 x 2.5 + 4.5mm - 5pcs.
M.2 screws, size: M2 x 2.5mm - 10pcs.
Plastic washers, size: 5 x 0.5mm -10pcs.
Screwdriver - black plastic head - 1pc.
Specifications: Bus Type:PCI Express
Type Standard:Profile (LP bracket incl.)
Chipset:NEC UPD720201
Interface: USB 3.0 Port
Type and Rate :USB 3.0 - 5 Gbit/s
Connector Type(s): 1 - PCI Express x1 Male
External Ports: 4 - USB Type-A (9 pin) USB 3.0 Female
Internal Ports : 1 - SATA 15pin interface
Specifications: Main chip: NEC UPD720202 chipset
Have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times;
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer rate: 5Gbps/ 480Mbps/ 12Mbps / 1.5Mbps
Small Molex 4 pin to take
Features: This product is an ideal choice for any Mini PCI-Express expansible embedded or micro system needing larger volume and higher speed data transfer connectivity with USB devices. Real world applications such as: Connect to external hard disk drive, fast Solid State Drive(SSD), optical driver, high definition video camera etc.
Package Contents: 1 Piece Mini PCI-e to USB Expantion Card
1 Piece CD Driver
Operating Systems Supported: Support Windows XP/Server 2003/Vista/7 /8 (32/64 bit) /MAC/linux
Compatibility: Have one of the available PCI-Express slots(PCIe x1 or above). Windows operating system support (R) XP/Server 2003/Vista/7 /8 (32/64 bit) /MAC/linux
Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Use Screw to install the heatsink.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 35mm x 35mm x 10mm
Weight: 35g
Package Content: 2pcs x Heatsink
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 8.8mm x 8.8mm x 5mm
Heat-conductive adhesive tape is included
Weight: 35g
Package Content: 50 x Heatsink...
Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
Weight: 30g
Package Content: 5pcs x Heatsink