Computer Accessories

(3)

• Brand: ORIC
• Series: CD3510
• Model: CD3510
• Size: 3.5"
• Model #: CD3510-US-BK-BP

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

• Type: Case Fan
• Color: Red
• Model #: B07J5SRR26

• Part Number: Canned thermal paste has a unit price about 50% lower than syringe packaging, and is more recommended for large consumer groups such as physical stores, server fields, power battery fields, aerospace fields, etc.
• Volume / Net Weight: 150g
• Thermal Conductivity: 12 W/mK
• Long Term Operating Temperature: -50 to 260 C
• Model #: Newegg027

• Volume / Net Weight: 23g
• Thermal Conductivity: 21W/mk
• Long Term Operating Temperature: -40 to 200 C
• Model #: OEM-21W100X05MM

• Type: Case Fan
• Bearing Type: Hydro Bearing
• RPM: <1600 RPM
• Air Flow: 45-50 CFM
• Model #: 609015786352

• Model #: 62449-Yp6l_UC9L-i5CN

• Type: CPU Cooler Fan
• Bearing Type: Ball
• RPM: 4000-4499 RPM
• Noise Level: 10 - 15 dBA
• Model #: DE07015B12L 0

• Type: CPU Block
• Model #: RT58-TOOL

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: <1600 RPM
• Air Flow: 20-25 CFM
• Model #: RGB120MM8PCS

Limited time offer, ends 07/31

• Part Number: AAATHPSP
• Model #: AAATHPSP X10

• Type: Case Fan
• Bearing Type: Hydro Bearing
• RPM: <1600 RPM
• Air Flow: 45-50 CFM
• Model #: 609015786376

• Type: CPU Water Cooling
• LED: Addressable RGB
• Model #: GD-CHIONE M4-360

Limited time offer, ends 07/31

• Model #: PSUTESTER01

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: 900~1850RPM±10%
• Air Flow: 68CFM
• Model #: ZC-ZSWhite*3

Limited time offer, ends 07/31

• Type: Enclosure
• Maximum Capacity (per Bay): Up to 1TB
• Features: Slim aluminum 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure SATA III to USB 3.0 enclosure,Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 UASP enclosure, 20% faster than traditional USB 3.0, lower CPU utilization Compatible with 7mm~ 9.5mm slim 2.5 inch SATA I,SATA II
• Package Contents: 1 x 2.5 inch HDD Enclosure 1 x 1.64ft USB Data Cable 1 x Screwdrive 1 x Screws package
• Model #: ENU325SSDHTS

• Type: Accessories
• Model #: NM-M1-MP83 chromax.black

• Model #: NA-HC6 chromax.white

• Model #: 32664-_S-AUUq8V-j-xC

• Model #: BEDONGRONG236157WT

• Series: Air Cooler Series
• Color: Black
• Type: Fan & Heatsinks
• RPM: 800-2200rpm
• Model #: AVC Cooler-003-Tri

• Brand: Thermal Grizzly
• Model: TG-KS-25-25
• Part Number: TG-KS-25-25
• Features: KryoSheet graphene thermal pads are an excellent alternative for thermal pastes and have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet offers significantly higher thermal conductivity.
• Model #: TG-KS-25-25

• Type: Case Fan
• Power Connector: 2 Pin
• Color: Transparent
• Model #: led12025col

• Model #: AFC0912DB

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Type: Case Fan
• Bearing Type: Fluid Dynamic
• RPM: 900~2200RPM±10%
• Air Flow: 76CFM
• Model #: ZC-ZS-TI White*3

Limited time offer, ends 07/31

• Model #: 11-001-330

• Model #: BEHOOBRO2T

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 07/31

• Brand: En-Labs
• Compatibility: 3.5" Drive Bay
• Material: Plastic
• Package Contents: 4 Channel speed controller 4pcs mounting screws
• Model #: 11-001-142

• Fan Size: 120mm
• Series: N/A
• Type: CPU Water Cooling
• RPM: 800-2150 RPM±10%
• Model #: GL360-RGB Black

• Model #: DRG-U6 PRO-200g

• Brand: Unique Bargains
• Model #: a16090600ux0360

Limited time offer, ends 07/31

• Type: Power Splitter
• Type: Cable Splitters
• Color: Black
• Length: 11" - 15"
• Model #: 3PINSPL212