Computer Accessories

• Model #: 6402411562339ASDFA331579

• Model #: PCICOVERLATCH

• Model #: ACFAN00334A

• Type: PCI Express USB Card
• External USB Ports: 2 x USB 3.2 Gen 2x1 USB Type-A (9 pin, 10 Gbps) 2 x USB 3.2 Gen 2x1 USB Type-C (24 pin, 10 Gbps)
• Internal Ports: 1 x SATA Power (15 pin)
• Standard: Industry Standards: PCI Express Base Specification Rev. 3.0 USB 3.2 Specifications UASP (USB Attached SCSI Protocol) Rev. 1.0
• Model #: PEXUSB312A2C2V

• Color: Black
• Conversion Tray: 2 x 2.5" Drive to 3.5" Bay
• Specifications: Interface: SATA Connector Type(s): RJ-45 Enclosure Type: Steel Package: 1 x Dual 2.5" Mounting Bracket 1 x SATA Power Y cable 2 x SATA DATA Cable
• Model #: BRACKET25X2

• Color: Red
• Model #: PC-Case Fan-07

• Color: Black
• Conversion Tray: 1 x 2.5" Drive to 3.5" Bay
• Mobile Rack Drives Support: 1 x 2.5" Drive to 3.5" Bay
• Mobile Rack Interface: SATA I/II/III/SAS
• Model #: MB882SP-1S-3B

Limited time offer, ends 07/06

• Type: Controller Card
• External USB Ports: PCI Express
• Compatibility: Supports 2280/2260/2242/2230mm M-Key M.2 NVMe SSD
• Specifications: Compatible with: Apply to 2280/2260/2242/2230mm M.2 PCI-e NVMe SSD. Not supported SATA-based M.2 SSD. Compatibility with PCIe NVMe SSD (Incomplete List): Samsung XP941, SM951 (NVMe), 950 Pro Series SSDs, PM961, 960EVO, SM961, PM951, 960EVO. INTEL 600P. Liteon T10. Kingston HyperX Predator M.2. Plextor M6e Series M.2 SSD.
• Model #: NVTPCE16XB

• Model #: a15052300ux0387

• Volume / Net Weight: 1.0g
• Thermal Conductivity: 73 W/mK
• Long Term Operating Temperature: 10 °C / +140 °C
• Features: Thermal Conductivity: 73 W/mk Consistency: Liquid Viscosity: 0,0021 Pas Density: 6,24g/cm3 Recommended Temperature: 10 °C / +140 °C
• Model #:

• Brand: Anker
• Series: AK-A7516012 Anker
• Type: USB
• Standards: USB 3.0
• Model #: 019663816202

• Brand: b-Shark
• Fan Size: 120mm
• Type: Case Fan
• Bearing Type: Fluid Dynamic
• Model #: BG01794

• Installation Type: Internal
• Support - Compact Flash: Yes
• Support - Memory Stick: Yes
• Support - SD: Yes
• Model #: DZ-ZHT-216-A

• Specifications: Main chip: NEC UPD720202 chipset Have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times; Backward compatible with USB2.0, USB1.1, USB1.0 Transfer rate: 5Gbps/ 480Mbps/ 12Mbps / 1.5Mbps SATA to take power by the board, or you can into a small Molex 4PIN power. (To change, please contact customer service) Built-in 19-pin can turn out two USB3.0 ports Compliance with PCI-Express Specification Revision 2.0 Compliance with xHCI specification version 1.0 Compliance with USB3.0 SuperSpeed specification version 1.0 USB support hot swap function Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers. Note: Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cabl...
• Model #: 11-001-241

• Specifications: Device Supported: MacBook Android Device USB Device iPhone iPad Tablet PC Smartphone Input Voltage: 24 V DC 12 V DC Maximum Output Power: 20 W
• Features: Universal Compatibility: With both a USB-A and a USB-C port, this car charger offers a large range of compatibility including (but not limited to) smartphones, tablets, iPhones, or iPads. Fast-Charging: This car charger supports Power Delivery 3.0 20W and Quick Charge 3.0 18W; USB-A and USB-C ports work independently. The total combined maximum output is 38W. Designed with Safety in Mind: This car charger features short circuit protection, overcurrent protection, overvoltage protection, and over-temperature protection.
• Model #: A01109

(136)

Limited time offer, ends 07/05

• Color: Black
• Type: USB
• Standards: USB 3.0
• Ports: 4*USB 3.0 +3.5mm Audio+SD/TF Slot+RJ45 w/ Adapter
• Model #: OMA-7P-US-GY-EP

• Type: USB
• Standards: USB 3.0
• Ports: 4 x USB 3.0
• Transfer Rate: Up to 5 Gbps
• Model #: FP525U34M

• Specifications: Color: Beige Product Height: 0.1 in [2.0 mm] Product Length: 18.1 in [46.0 cm] Weight of Product: 13.9 oz [395.0 g] Product Width: 11.8 in [30.0 cm] Materials: Top Layer - Anti-Static PVC Bottom Layer - PVC Foam
• Package Contents: 1 - Anti-Static Mat 1 - Quick-Start Guide 1 - 6.6 ft. [2m] grounding cable
• Model #: SMANTISTATICMAT

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14mm x 14mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Dim...
• Model #: 11-001-052

• Type: Case Fan
• Bearing Type: Hydro Bearing
• RPM: <1600 RPM
• Air Flow: 45-50 CFM
• Model #: 769773760572

(3)

• Volume / Net Weight: 4.0g
• Thermal Conductivity: 4.5 W/mK
• Long Term Operating Temperature: -50 to 200 C
• Specifications: Viscosity: 76 Pa-s Dimensions: 7.05" (L) x 3.5" (W) x 0.59" (H) Weight: 4 g Shelf Life: 24 months Color: Grey
• Model #: CL-O023-GROSGM-A

• Model #: 683491620058

Limited time offer, ends 07/24

• Type: SATA
• Transfer Rate: Up to 6 Gbps
• Operating System Supported: Windows XP /2003 / 7 / 8 / 10 / 11 / MAC / NAS / Linux OS.
• Dimensions: 6.14 x 5.08 x 1.02 inches
• Model #: W-PCIE24SATA-1

• Type: USB
• Standards: USB 3.1
• Model #: FP35U32UCAM

• Type: USB
• Standards: USB 3.0
• Ports: 7 x USB 3.0
• Transfer Rate: Up to 5 Gbps
• Model #: FP525U37M

Limited time offer, ends 07/24

• Type: USB / Reader
• Standards: USB A/USB C
• Max Devices Supported: 8-Port
• Ports: USB C to USB 3.0 hub with 1 x USB 3.0 port, 3 x USB 2.0 ports, 1 x USB C 2.0 port, SD/TF Carder Reader and 1 x 3.5mm Audio Jack.
• Model #: W-BYL-2218TU-2

• Brand: Anker
• Series: A8309012 Anker
• Max Devices Supported: 127
• Ports: 1 x USB 3.0, 3 x USB 2.0
• Model #: 733546584036

• Bearing Type: 2 Ball
• RPM: 1200 to 5000RPM±10%
• Air Flow: 13
• Part Number: b-BlasterPWM 90
• Model #: b-BlasterPWM 90

• Model #: BK046

Limited time offer, ends 07/05

• Brand: Adiven
• Type: cooler
• Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. 10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
• Model #: AD-M2CL722

Limited time offer, ends 07/24

• Type: USB / Ethernet
• Standards: USB 3.0
• Max Devices Supported: 4-Port
• Ports: 4 in 1 USB to ethernet adapter features a 1000Mbps RJ45 gigabit port, 3 USB 3.0 ports.
• Model #: W-A2N3USB3-4

• Color: White ARGB
• Model #: DM-GPU Brace-GH6-W

• Model #: ACFAN00328A

• Type: USB
• Standards: USB 3.0
• Ports: 4 x USB 3.0
• Transfer Rate: Up to 5 Gbps
• Model #: U360-004-MINI

• Model #: sss-207

• Model #: 69011892378