Specifications: Dimensions(L x W x H):
GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58"
305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58"
Riser cable: 165mm / 6.49"
Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.)
Supported GPU Type: Any length, up to3 slots wide
Riser Cable Model: Riser Cable PCIe 4.0 x16
Compatibility: PCIe 4.0 and older
Certifications: BKC210933AC
PCB / Wire UL Numbers: E1895721/E252840
Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG
Insulation Materials: PE, TPE
Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass
Connectors: PCIe x16 Male to PCIe x16 90° Female
Rated working voltage and current: DC 12V / 5A
Operating Temperature: -20° to ...
Specifications: Test for:
Tests 20-pin and 24-pin power supplies
Tests SATA power
Tests Pentium 4 power connector
Tests PCI-Express power connectors
Tests Xeon power connectors
Tests Floppy drive connectors
Tests standard 4-pin power supply connectors
Tests for +3.3V, -12V, PG, +5VSB, +12V, -5V, +5V outputs
Note:
The -5V DC output is took off from Intel ATX12V design guide since the 1.2 version.
1. The -5V usage was for last generation ISA slot. But the old ISA had been phased out since 1993~1994.
2. Neither P3 nor P4 systems will need -5V output.