Computer Accessories

• Model #: 9158154928433

• Model #: 677658547999

• Type: Fan & Heatsinks
• Color: Black
• Model #: BEIS-67-XT BK

• Brand: Noctua
• Fan Size: 92mm
• Type: Fan & Heatsinks
• LED: Non-LED
• Model #: L9a-AM5-Black

• Model #: 676088010400

• Brand: Sudokoo
• Fan Size: 92mm
• Series: AC
• Type: Air
• Model #: SK620

• Model #: TL611 Pro

• Model #: dq87pg

• Fan Counts: 3 Fans
• Fan Controller: No Controller
• Type: Case Fan
• Compatibility: Case
• Model #: ZC-360W

• Brand: Intel
• Fan Size: 92mm
• Series: AC
• Type: Fan & Heatsinks
• Model #: ACFRE00190A

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
• Dimensions: 15mm x 15mm x 0.3mm
• Model #: 11-001-266

• Brand: Noctua
• Fan Size: 92mm
• Bearing Type: Ball
• Series: AC
• Model #: NH-L9i-17xx chromax.Black-

• Type: CPU Block
• Model #: N-MS5090DTRIO-X

• Type: CPU Block
• Model #: N-GV5090DWF-X-V2

• Type: CPU Block
• Model #: B-3090TC-X-NE

• Part Number: ACFRE00158A
• Model #: 301877955852

• Model #: 90MB1CV0-M0EAY0

• Type: CPU Block
• Model #: 6932167225511

• Model #: 9435761222940

• Model #: HMT451U6AFR8C-PB

• Model #: 90MB1CQ0-M0EAY0

• Model #: CM8068403358220

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Type: CPU Block
• Model #: A-PC9070XT-X

(1)

• Brand: Thermaltake
• Model: CL-P144-AL12SW-A
• Fan Size: 120mm
• Bearing Type: Hydraulic
• Model #: CL-P144-AL12SW-A

• Model #: CT16G4DFS8266

Limited time offer, ends 07/31

• Model #: 11-001-330

• Model #: AC-080-OOPNAN-A1

Limited time offer, ends 07/31

• Model #: 11-001-235

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Model #: A-AR9070XTTC-X

• Type: CPU Block
• Model #: N-ICH5090DX3-X

• Type: CPU Block
• Model #: N-GV5080GMOC-X-V2

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

• Model #: a19122800ux0675

• Model #: 652843991023