Fans & PC Cooling

• Model #: a21032600ux0282

Limited time offer, ends 02/28

• Model #: 11-001-292

• Brand: Noctua
• Fan Size: 92mm
• Bearing Type: SSO
• Type: Fan & Heatsinks
• Model #: NH-U9B SE2

• Model #: 12025w

• Model #: PINKFLOW240 ID

• Model #: 70mm DC 5V

• Brand: Noctua
• Fan Size: 140mm and 120mm
• Bearing Type: SSO
• Type: Fan & Heatsinks
• Model #: NH-D14 SE2011

• Model #: MOD-0076

• Model #: 1-CaseFans1190

• Type: CPU Block
• Model #: RGV-LAN-O11XL-P-K

• Model #: 81170-E6ZRsFWVD-wAA-

Limited time offer, ends 02/28

• Model #: 11-001-343

Limited time offer, ends 02/28

• Model #: 11-001-294

Limited time offer, ends 02/28

• Model #: 11-001-330

• Brand: Dynatron
• Fan Size: 75mm
• Bearing Type: 2 Ball
• Type: Fan & Heatsinks
• Model #: K2

Limited time offer, ends 02/25

• Type: Case Fan
• Dimensions: 80×40×18mm
• Model #: 4010GPU2PACK

Limited time offer, ends 02/25

• Type: Case Fan
• Dimensions: 40×40×23mm
• Model #: 4010GPU1PACK-H

• Type: Heatsinks only
• Model #: TG-DDM-R7000-R

• Type: Case Fan
• Model #: ACFAN00296A

• Brand: Dynatron
• Type: Heatsinks only
• Heatsink Material: Copper C1020
• Fan Dimensions: 100 x 74 x 24mm
• Model #: A51/A51G

Limited time offer, ends 02/28

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: 6908110145

Limited time offer, ends 02/28

• Model #: 11-001-100

• Type: Fan & Heatsinks
• Model #: BE0VSD9W6E5

Limited time offer, ends 02/28

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
• Dimensions: 20mm x 20mm x 6mm
• Model #: 11-001-258

• Type: Heatsinks only
• Model #: NM-TR5-SP6

Limited time offer, ends 02/28

• Model #: 11-001-062

Limited time offer, ends 02/28

• Model #: 11-001-325

Limited time offer, ends 02/28

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
• Dimensions: 28 x 28 x 20mm
• Model #: 11-001-327

Limited time offer, ends 02/28

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Weight: 35g Package Content: 50 x Heatsink
• Dimensions: 8.8mm x 8.8mm x 5mm
• Model #: 11-001-256

Limited time offer, ends 02/28

• Color: Silver
• Compatibility: VGA Chipsets
• Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
• Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
• Model #: 11-001-128

• Model #: a21032600ux0301

Limited time offer, ends 02/28

• Model #: 11-001-066

Limited time offer, ends 02/28

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
• Dimensions: 40 x 40x 11mm
• Model #: 11-001-191

Limited time offer, ends 02/28

• Model #: 11-001-255(2)

Limited time offer, ends 02/28

• Brand: En-Labs
• Fan Size: 120mm
• Bearing Type: Hydraumatic Bearing
• Type: Fan & Heatsinks
• Model #: QXPCV6PWM