Compatibility: Tripp Lite UPS system with compatible accessory slot (please verify compatibility with your UPS before ordering)
Ethernet network with TCP/IP protocol (ports 3664 and 3665 must be open on your firewall)
SNMP-based network management software, web browser (Chrome, Firefox or Safari) and/or VT-100 Telnet and/or SSH client
Package Contents: WEBCARDLXMINI Web Management Accessory Card
USB Micro-B to USB-A cable
Faceplates
Owner's manual
Specifications: Temperature readings: Fahrenheit, Celsius
Temperature accuracy: 14°F to 158°F +/- 0.9°F; -10°C to 70°C +/- 0.5°C
Humidity accuracy: 10-90 RH ± 2%
Voltage: 12V (from RMCARD)
Input dry contact: 4
Connection port & cable: RJ45 Ethernet port x 2, 10 ft. cable, Daisy Chain x 8 Max
Front Panel LEDs: Front panel LEDs confirm amp (A) / kilowatt (kW) / voltage (V) / frequency (Hz) and power factor (PF) reporting information; Additional set of LEDs indicate Source A and Source B inputs for preferred, available and in-use status
Certifications: Tested to UL/CSA 60950-1 (USA, Canada), FCC Class A (Emissions), NOM (Mexico)
Front Panel LEDs: 16 power availability LEDs confirm power off/on status for each built-in outlet. Two additional LEDs with toggle button identify which bank the visual current meter is reporting (bank 1, bank 2 or bank 1&2 combined)
Certifications: Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico)
Front Panel LEDs: Front panel LEDs confirm amp (A) / kilowatt (kW) / voltage (V) / frequency (Hz) and power factor (PF) reporting information; Additional set of LEDs indicate Source A and Source B inputs for preferred, available and in-use status
Certifications: Tested to UL/CSA 60950-1 (USA, Canada), FCC Class A (Emissions), NOM (Mexico)
Specifications: Output
Output Power Capacity: 10 kWatts / 10 kVA
Max Configurable Power: 10 kWatts / 10 kVA
Nominal Output Voltage: 208 V,208 V 3PH
Efficiency at Full Load: 92.00%
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 57 - 63Hz for 60Hz nominal
Crest Factor: Unlimited
Waveform Type: Sine wave
Output Connections: (1) Hard Wire 5-wire (3PH + N + G)
Input
Nominal Input Voltage: 208 V,208 V 3PH
Input Frequency: 60Hz +/- 3Hz
Input Connections: Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations: 177 - 239 (208 V) V
Communications & Management
Interface Port(s): RJ-45 10 Base-T ethernet for web / SNMP / Telnet management, SmartSlot
Audible Alarm: Alarm when on battery / distinctive low battery alarm / configurable delays
Approvals: cUL Listed, FCC Part 15 Class A, ISO 140...
Compatibility: CyberPower Systems Smart App Sinewave UPS Systems
CyberPower Systems Smart App Intelligent LCD/AVR UPS Systems* (CPS1500AVR UPS system is NOT supported)
CyberPower Systems Automatic Transfer Switch (ATS) Power Distribution Units (PDU)
Please see RMCARD Compatibility Chart in the Resources section for details
Note: *UPS systems manufactured in or before 2010 may have a ribbon cable coming out of the RMCARD port and are not compatible with the RMCARD205.
Specifications: System Requirements:
An Ethernet network connection
Web Browser
Network Management System (NMS) compliant with SNMPv1/v3 (optional)